Karcher KMR 1550 B manual Setting the Sweeping Pattern

Page 22

English

Operating instructions for users

KMR 1550 B

n Centre the new filter on the driver (1). Push in the thrust bearing (2). Turn

the thrust bearing clockwise until the stop and fasten with the screws (3).

n Insert the preliminary filter and secure it with the two hand screws.

Setting the Sweeping Pattern

Note:

The main brush can be reset to:

– Floating 1: With its deadweight the main brush rests on the floor.

– Stationary 2: The sweeping pattern is adjustable at the main brush.

In order to adjust the sweeping pattern reset the main brush to “Stationary”.

n Open and stay cover

n Reset main brush to “Stationary 2”

n The sweeping pattern can be altered by turning the adjusting screw. To increase coverage – turn screw outwards

or

To reduce coverage – turn screw inwards

nClose the bonnet.

Check the sweeping pattern after making any adjustments.

nDrive the sweeper onto a dusty surface.

n Lower the brush roller and let it sweep for several seconds.

n Raise the brush roller and drive the sweeper backwards a short distance with the bulk waste flap opened.

nThe width of the contact area should be 60 - 80 mm.

Note:

If the sweeping pattern is irregular in shape, arrange for Customer Service to make the necessary corrections.

42

Page 21 Page 23
Image 22
Page 21 Page 23
Contents KMR 1550 B Deutsch English Français Italiano Nederlands Español Contents Operating instructions for usersExplosion hazard while refuelling For your safetyEnclosed leaflet Safety Information No Fire hazard while sweeper is operatingMain components Moving the sweeper Prior to initial start-upAfter moving the sweeper without the engine running Operating controls Operating the sweeperDashboard Preparing the sweeper for use Adjusting the driver’s seatAdjusting r.p.m. of side brush Filling the fuel tank Explosion hazard while refuellingDriving the sweeper for the first time Setting offStarting the sweeper BrakingManual cleaning Cleaning the filter Emptying the waste containerAutomatic cleaning Some important points in advance Injury hazardSweeping Dry Floors Typical applicationsSweeping a damp or wet floor surface Sweeper Long-term storageTransporting Picking up large items sticks, cans, etcCleaning and care MaintenanceMaintenance tasks Tilting the seat forwards/backwards Burns hazardTool compartment and sweeper tool kit Disconnecting the batteryOpening/closing the bonnet Checking tyre pressureTopping up with engine oil Replacing the engine oil filter Cleaning the air filterReplacing the fuel filter Checking the hydraulic fluid level Checking the electrolyte in the battery Safety informationCharging the battery Replacing the brush roller Replacing sealing stripsReplacing the side brush Burns hazard Take care not to touch the hot exhaustReplacing fuses Replacing the dust filterSetting the Sweeping Pattern Troubleshooting Technical specifications KMR 1550 B KMR 1550 B KONFORMITÄTSERKLÄRUNG-EG Quiposy Xxx-948.1

KMR 1550 B specifications

The Kärcher KMR 1550 B is an innovative and powerful ride-on sweeper designed for efficient cleaning in various environments, including indoor and outdoor surfaces. This machine combines advanced technology with user-friendly features, making it an ideal solution for both commercial and industrial applications.

One of the standout features of the KMR 1550 B is its robust and efficient cleaning system. The sweeper is equipped with dual side brushes that ensure thorough cleaning along edges and walls, while the main roller brush efficiently picks up larger debris. The combination of these brushes allows for effective sweeping of a wide range of materials, including dust, dirt, and leaves, ensuring a pristine environment.

The KMR 1550 B operates using a powerful, battery-powered electric drive, making it an eco-friendly choice for users conscious of their environmental impact. The machine provides quiet operation, allowing for use in noise-sensitive areas without disruption. With its impressive battery life, the sweeper can run for hours on a single charge, maximizing productivity and minimizing downtime.

Another key characteristic of the KMR 1550 B is its ergonomic design. The spacious driver's seat is adjustable, ensuring comfort for operators of varying heights. The intuitive control system allows users to easily maneuver the machine, while the compact size ensures it can navigate tight spaces with ease. Safety features, such as automatic braking and visibility-enhancing lights, further enhance the user experience.

Additionally, the KMR 1550 B boasts a large debris hopper, which reduces the frequency of emptying and allows for longer cleaning intervals. This feature is especially beneficial in large areas where continuous operation is necessary. The hopper can be easily emptied from the driver's seat, streamlining the cleaning process.

Maintenance is straightforward with the KMR 1550 B, as Kärcher designed it with accessibility in mind. Regular maintenance points are easy to reach, ensuring that the machine remains in optimal condition for maximum performance over time.

In summary, the Kärcher KMR 1550 B is a versatile and efficient ride-on sweeper that combines advanced technologies with practical features. Its powerful cleaning capabilities, eco-friendly operation, ergonomic design, and ease of maintenance make it an excellent choice for anyone seeking a reliable solution for their cleaning needs.
Top Page Image Contents