Karcher KMR 1550 B manual Preparing the sweeper for use, Adjusting the driver’s seat

Page 8

English

Operating instructions for users

KMR 1550 B

Preparing the sweeper for use

All directions given (left/right, front/rear) are as seen from the driver’s seat.

nCheck the oil level in the engine (see Chapter: “Maintenance”).

nCheck the level of coolant in the radiator (see Chapter: “Maintenance”).

nCheck the amount of fuel in the tank and fill up, if required (see below).

nCheck the level of hydraulic fluid and top up, if required (see Chapter: “Maintenance”).

nCheck the air pressure in the tyres (see Chapter: “Maintenance”).

nInspect the brush roller and remove any string, rope, etc., that may be caught up in the brushes.

nCheck the dust filter. If it is very dirty, operate the shaker to clean it off .

nEmpty the waste container.

Adjusting the driver’s seat

The driver’s seat can be adjusted to fit people of different sizes.

nPull the lever outwards.

nAdjust the seat position and release the lever.

nMove the seat back and forth to ensure that it has locked in position.

Filling the fuel tank

Explosion hazard while refuelling!

nDo not fill up with fuel

–in an enclosed space

–while the engine is running.

nDo not smoke while refuelling the vehicle.

nFuel expands as it becomes warmer.

Do not fill the tank right up to the top. Leave a gap of at least 1 cm under the bottom edge of the filler neck.

nWipe up any fuel they may have been spilt and ensure that the cap is replaced firmly on the tank.

Opening the fuel tap

nOpen up the bonnet and make sure it locks in position.

nOpen the fuel tap.

OPEN = Knob turned so that it is parallel to fuel pipe

nClose the bonnet.

Adjusting r.p.m. of side brush

 

 

n A clockwise turn reduces the r.p.m. of the side brush.

-

+

n

A counterclockwise turn increases the r.p.m. of the side brush.

 

 

28

 

 

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents KMR 1550 B Deutsch English Français Italiano Nederlands Español Contents Operating instructions for usersFor your safety Enclosed leaflet Safety Information NoExplosion hazard while refuelling Fire hazard while sweeper is operatingMain components After moving the sweeper without the engine running Prior to initial start-upMoving the sweeper Dashboard Operating the sweeperOperating controls Adjusting the driver’s seat Adjusting r.p.m. of side brushPreparing the sweeper for use Filling the fuel tank Explosion hazard while refuellingSetting off Starting the sweeperDriving the sweeper for the first time BrakingCleaning the filter Emptying the waste container Automatic cleaningManual cleaning Some important points in advance Injury hazardSweeping a damp or wet floor surface Typical applicationsSweeping Dry Floors Long-term storage TransportingSweeper Picking up large items sticks, cans, etcCleaning and care MaintenanceMaintenance tasks Tilting the seat forwards/backwards Burns hazardDisconnecting the battery Opening/closing the bonnetTool compartment and sweeper tool kit Checking tyre pressureTopping up with engine oil Replacing the fuel filter Cleaning the air filterReplacing the engine oil filter Checking the hydraulic fluid level Charging the battery Safety informationChecking the electrolyte in the battery Replacing sealing strips Replacing the side brushReplacing the brush roller Burns hazard Take care not to touch the hot exhaustReplacing fuses Replacing the dust filterSetting the Sweeping Pattern Troubleshooting Technical specifications KMR 1550 B KMR 1550 B KONFORMITÄTSERKLÄRUNG-EG Quiposy Xxx-948.1

KMR 1550 B specifications

The Kärcher KMR 1550 B is an innovative and powerful ride-on sweeper designed for efficient cleaning in various environments, including indoor and outdoor surfaces. This machine combines advanced technology with user-friendly features, making it an ideal solution for both commercial and industrial applications.

One of the standout features of the KMR 1550 B is its robust and efficient cleaning system. The sweeper is equipped with dual side brushes that ensure thorough cleaning along edges and walls, while the main roller brush efficiently picks up larger debris. The combination of these brushes allows for effective sweeping of a wide range of materials, including dust, dirt, and leaves, ensuring a pristine environment.

The KMR 1550 B operates using a powerful, battery-powered electric drive, making it an eco-friendly choice for users conscious of their environmental impact. The machine provides quiet operation, allowing for use in noise-sensitive areas without disruption. With its impressive battery life, the sweeper can run for hours on a single charge, maximizing productivity and minimizing downtime.

Another key characteristic of the KMR 1550 B is its ergonomic design. The spacious driver's seat is adjustable, ensuring comfort for operators of varying heights. The intuitive control system allows users to easily maneuver the machine, while the compact size ensures it can navigate tight spaces with ease. Safety features, such as automatic braking and visibility-enhancing lights, further enhance the user experience.

Additionally, the KMR 1550 B boasts a large debris hopper, which reduces the frequency of emptying and allows for longer cleaning intervals. This feature is especially beneficial in large areas where continuous operation is necessary. The hopper can be easily emptied from the driver's seat, streamlining the cleaning process.

Maintenance is straightforward with the KMR 1550 B, as Kärcher designed it with accessibility in mind. Regular maintenance points are easy to reach, ensuring that the machine remains in optimal condition for maximum performance over time.

In summary, the Kärcher KMR 1550 B is a versatile and efficient ride-on sweeper that combines advanced technologies with practical features. Its powerful cleaning capabilities, eco-friendly operation, ergonomic design, and ease of maintenance make it an excellent choice for anyone seeking a reliable solution for their cleaning needs.
Top Page Image Contents