Karcher KMR 1550 B manual Topping up with engine oil

Page 16

English

Operating instructions for users

KMR 1550 B

 

Checking the engine oil level

 

 

Caution,

 

1

Risk of burns from hot exhaust pipe!

 

 

 

 

n Park the sweeper on a level surface.

 

 

n Unscrew the dipstick.

 

 

n Wipe the dipstick clean and screw it back in.

 

 

n Unscrew the dipstick once again.

 

 

The oil level should be between the “Min” and the “Max” marks.

 

If the oil level is below “Min” – top up with engine oil.

 

 

If the oil level is above “Max” – drain off excess engine oil.

 

 

n Screw the dipstick back in again.

 

Topping up with engine oil

nPour engine oil into the engine through the filler hole in the cylinder head. Engine oil SAE 30 or SAE10W-30.

The engine oil must correspond to the following classification: SF, SE, SD or SC and should be a primary raffinate.

The engine oil should contain no additives.

If the outside temperature is below –5 °C, 5W-30 or 5W-20 can also be used.

Replacing the engine oil

Caution,

Environmental hazard caused by engine oil!

Deposit the waste oil resulting from an oil change at a waste oil collection point or take it to a waste disposal company.

Caution,

Danger of burns from hot exhaust pipe or scalding by hot engine oil!

nRun the engine until it reaches operating temperature.

nPark the sweeper on a level surface.

nOpen the bonnet.

nPlace a suitable receptacle under the sweeper to collect the waste oil.

nUnscrew valve and drain out oil through a hose.

nPour fresh engine oil into the filler hole. Capacity: 1.65 litres

nMake sure that the oil filler hole is properly sealed.

nWipe off any oil that may have been spilt and dispose of the waste oil properly.

36

Page 15 Page 17
Image 16
Page 15 Page 17
Contents KMR 1550 B Deutsch English Français Italiano Nederlands Español Contents Operating instructions for usersFor your safety Enclosed leaflet Safety Information NoExplosion hazard while refuelling Fire hazard while sweeper is operatingMain components Moving the sweeper Prior to initial start-upAfter moving the sweeper without the engine running Operating controls Operating the sweeperDashboard Adjusting the driver’s seat Adjusting r.p.m. of side brushPreparing the sweeper for use Filling the fuel tank Explosion hazard while refuellingSetting off Starting the sweeperDriving the sweeper for the first time BrakingCleaning the filter Emptying the waste container Automatic cleaningManual cleaning Some important points in advance Injury hazardSweeping Dry Floors Typical applicationsSweeping a damp or wet floor surface Long-term storage TransportingSweeper Picking up large items sticks, cans, etcCleaning and care MaintenanceMaintenance tasks Tilting the seat forwards/backwards Burns hazardDisconnecting the battery Opening/closing the bonnetTool compartment and sweeper tool kit Checking tyre pressureTopping up with engine oil Replacing the engine oil filter Cleaning the air filterReplacing the fuel filter Checking the hydraulic fluid level Checking the electrolyte in the battery Safety informationCharging the battery Replacing sealing strips Replacing the side brushReplacing the brush roller Burns hazard Take care not to touch the hot exhaustReplacing fuses Replacing the dust filterSetting the Sweeping Pattern Troubleshooting Technical specifications KMR 1550 B KMR 1550 B KONFORMITÄTSERKLÄRUNG-EG Quiposy Xxx-948.1

KMR 1550 B specifications

The Kärcher KMR 1550 B is an innovative and powerful ride-on sweeper designed for efficient cleaning in various environments, including indoor and outdoor surfaces. This machine combines advanced technology with user-friendly features, making it an ideal solution for both commercial and industrial applications.

One of the standout features of the KMR 1550 B is its robust and efficient cleaning system. The sweeper is equipped with dual side brushes that ensure thorough cleaning along edges and walls, while the main roller brush efficiently picks up larger debris. The combination of these brushes allows for effective sweeping of a wide range of materials, including dust, dirt, and leaves, ensuring a pristine environment.

The KMR 1550 B operates using a powerful, battery-powered electric drive, making it an eco-friendly choice for users conscious of their environmental impact. The machine provides quiet operation, allowing for use in noise-sensitive areas without disruption. With its impressive battery life, the sweeper can run for hours on a single charge, maximizing productivity and minimizing downtime.

Another key characteristic of the KMR 1550 B is its ergonomic design. The spacious driver's seat is adjustable, ensuring comfort for operators of varying heights. The intuitive control system allows users to easily maneuver the machine, while the compact size ensures it can navigate tight spaces with ease. Safety features, such as automatic braking and visibility-enhancing lights, further enhance the user experience.

Additionally, the KMR 1550 B boasts a large debris hopper, which reduces the frequency of emptying and allows for longer cleaning intervals. This feature is especially beneficial in large areas where continuous operation is necessary. The hopper can be easily emptied from the driver's seat, streamlining the cleaning process.

Maintenance is straightforward with the KMR 1550 B, as Kärcher designed it with accessibility in mind. Regular maintenance points are easy to reach, ensuring that the machine remains in optimal condition for maximum performance over time.

In summary, the Kärcher KMR 1550 B is a versatile and efficient ride-on sweeper that combines advanced technologies with practical features. Its powerful cleaning capabilities, eco-friendly operation, ergonomic design, and ease of maintenance make it an excellent choice for anyone seeking a reliable solution for their cleaning needs.
Top Page Image Contents