GE GNSF48A01, GNSF39A01 Normal Operation, Timer Display, Feature Optional Recharge Controls

Page 15

Normal Operation, Timer Display

During normal operation, the present time of day and AM or PM show in the control display area. When the demand computer determines a regeneration is needed, RECHARGE TONIGHT begins to flash in the display along with the present time. RECHARGE TONIGHT flashes until the next regeneration start time, then changes to RECHARGE NOW, which flashes until the regeneration is over. The display also shows the current cycle in the regeneration process. When the valve is in transition between cycles, both indicators flash.

Feature: Optional Recharge Controls

RECHARGE TONIGHT

 

TOUCH

 

 

RECHARGE NOW

 

or

 

HOLD

 

 

Sometimes, a manually started regeneration (recharge) may be desired or needed. Two examples:

You have used more water than usual (house guests, extra washing, etc.) and you may run out of soft water before the next regeneration.

You did not refill the storage tank with salt before it was all gone.

Use one of the following features to start a regeneration immediately, or at the next preset regeneration start time.

RECHARGE NOW

Press and hold the TOUCH or HOLD button until RECHARGE NOW starts to flash in the control display area. The water softening system begins an immediate regeneration and, when over in about two hours, you will have a new supply of soft water. Once started, you cannot cancel this regeneration.

RECHARGE TONIGHT

Touch (do not hold) the TOUCH or HOLD button. RECHARGE TONIGHT flashes in the control display area. A regeneration will occur at the next preset regeneration start time. If you decide to cancel this regeneration, touch the same button once more.

Feature: Program Memory

If electrical power to the water softening system is interrupted, the control display is blank, but the control keeps correct time for about 72 hours. When power is restored, you have to reset the present time only if the display is flashing. All other settings are maintained and never require resetting unless a change is desired.

If the time is flashing after a long power outage, the water softening system continues to work as it should to provide you with soft water. However, regenerations may occur at the wrong time of day until you reset the control to the correct time of day.

15

Image 15
Contents 7221039 Water Softening systemTwo easy ways to register your appliance GE & You, a Service PartnershipSafety Precautions Installation instructions Important Installation RecommendationsUnpacking and Inspection Plan How You Will Install the Softener Where to Install the SoftenerTools and Materials Required for Installation Typical Installation Illustration Optional 3-Valve Bypass Installation IllustrationPlumb in and OUT pipes to and from softener Step-by-step installation instructionsInstall bypass valve Move the softener assembly into installation positionConnect to electrical power Install the brine tank overflow fittings and hoseInstall grounding clamps and wire Installation for water leaksProgramming the Control Set present time of daySet water hardness number Sanitizing Procedures GNSF39A GNSF48A About the water softener system Breaking a Salt Bridge Cleaning the Nozzle and Venturi Assembly Normal Operation, Timer Display Feature Optional Recharge ControlsFeature Program Memory ERR Feature/Service Automatic Electronic DiagnosticsFeature Other Data Displays To remove an error code 1 Unplug transformerNo Soft Water Timer/Softener, Service Checkout ProcedureOpen a Nearby Soft Water Faucet If the water softening system does not draw brine, check SET Time Care and cleaning of the water softening system Cleaning Iron Out of the Water Softening SystemChecking the Salt Storage Level and Refilling Problem Possible Causes What To Do No soft water Before you call for service…Water is blue color After installation Water softening systemNot using any salt Water feels slipperyResin beads showing After installationIs cloudy Error Code on control Salty tasting waterParts list 999 Parts catalog PLUG, Fill FLOW, .3 GPM Page Page Page We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Warrantor General Electric Company. Louisville, KY GE Water Softening System WarrantyFor The Period GE Will Replace What GE Will Not CoverGE Answer Center Service Telephone Numbers