GE GNSF39A01 Feature/Service Automatic Electronic Diagnostics, Feature Other Data Displays, Err

NOTE: Zero (%) shows until after the first regeneration begins, after connecting to electrical power.

WATER MANAGEMENT SYSTEM GPM

FLOW RATE, GPM— FLOW RATEWhen using soft water, this display shows the flow rate passing through the softener (in gallons per minute). Zero shows if water is not passing through the softener.

WATER MANAGEMENT SYSTEM

GALLONS TODAY— GALLONS TODAYEach day, beginning at midnight, the timer keeps a running count of the total gallons of water that have passed through the softener.

WATER MANAGEMENT SYSTEM

About the water softener system.

Feature/Service: Automatic Electronic Diagnostics

The timer computer has a self-diagnostic function for the electrical system (except input power and water meter). The computer monitors the electronic components and circuits for correct operation. If a malfunction occurs, an error code appears in the timer display.

The chart on Error Codes shows the error codes that could appear and possible defects for each code. While an error code is displayed, the TOUCH or HOLD and DATA buttons remain operable so you can perform the Manually Initiated Electronic Diagnostics.

ERROR CODE DISPLAYED	ERR 01	ERR 02	ERR 03	ERR 04	ERR 05
POSSIBLE DEFECT	➨ motor inoperative ➨ wiring harness, or connection to switch				➨ timer (PWA)
	➨ position switch ➨ valve defect causing high torque

To remove an error code: (1) Unplug transformer.

(2)Correct defect.

(3)Plug transformer in.

(4)Wait for at least 6 minutes. The error code will return if the reason for the error code was not corrected.

DATA

REMAINING CAPACITY FLOW RATE GPM GALLONS TODAY AVG. DAILY GALLONS

Feature: Other Data Displays

By continuing to press the DATA button, you can scan through four displays of operational information. This data appears in the bottom portion of the display area.

REMAINING CAPACITY —	WATER MANAGEMENT SYSTEM	This is the percentage of water softening capacity remaining.
	%
	CAPACITY

Immediately after a regeneration, 100% shows. As water is used, the percentage decreases until the next regeneration. During regenerations, the percentage increases.

AVG. DAILY GALLONS— AVG. DAILY GALLONSThe figure displayed is the average gallons of water used by

the household each day over the past seven day period.

NOTE: If preferred, you can set the timer to show the reading in liters instead of gallons.

If GALLONS TODAY or AVG. DAILY GALLONS exceeds 1999, a (x10) indicator appears, this means you must multiply the number shown by ten.

16