Electrolux SANTO 3675-6 KA manual Electrical Connection, Earth

Page 12

Installation

Electrical Connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

1 WARNING – THIS APPLIANCE MUST BE EARTHED

The manufacturer declines any liability should these safety measures not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

Important

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

Earth

Green

& Yellow

Blue

Neutral

 

Brown

Live

 

As the colours of the wires in the

 

mains lead of this appliance may

 

not correspond with the coloured

 

markings indentifying the terminals Blue

Brown

in your plug, proceed as follows:

 

1. The wire coloured green and

yellow must be connected to the

 

terminal marked with the letter

Cord Clamp

“E“ or by the earth symbol

 

or

 

 

coloured green and yellow.

 

2.The wire coloured blue must be connected to the terminal “N“ or coloured black.

3.The wire coloured brown must be connected to the terminal marked “L“ or coloured red.

4.Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheat.

1Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

12

818 19 88-01/8

Image 12
Contents Santo 3675-6 KA Dear customer High StreetSlough Berkshire SL 1 1DZContents Something Not Working Important Safety Instructions Prior to InstallationChild Safety When disposing of your old appliance Environmental InformationPackaging Old AppliancesAppliance Transport Before UseRemove the transport fittings from the storage shelves Installation Installation LocationPlease check whether, after installing Refrigerator needs VentilationAppliance Alignment Electrical Connection EarthInstallation of the carbon filter Reversing the Door Move the upper bearing pivot to the left Description of the Appliance View of the applianceButtons for Adjusting the Temperature These buttons are connected to the temperature displayControl Panel Temperature Display Prior to Initial Start-UpTemperature Adjustment Initial Start-UpCompressor will start and then run automatically Fast Chill button Quick chillTemperature warning Switching the Appliance offOpen Door Warning Holiday Mode Opening the DoorInterior Fittings Storage ShelvesSalad Bin Bottle Rack Quick Chill ShelfBottle and Can Holder Dismantling of the Bottle and Can Holder Variable Inner DoorBottle Holder Proper Storage Energy Saving Advice Hints and TipsNormal Operating Sounds Food StorageMaintenance and Cleaning Internal CleaningExternal Cleaning DefrostingChanging the carbon filter Light bulb specifications 220-240 V, max W, fitting E Replacing the Light BulbSymptom Solution Something Not WorkingRegulations, Standards, Guidelines Technical Terminology Refrigerant CircuitGuarantee Conditions European GuaranteeService & Spare Parts Calls may be recorded for training purposesSubject to change without notice