Electrolux SANTO 3675-6 KA manual Hints and Tips, Normal Operating Sounds, Food Storage

Page 27

Hints and Tips

Normal Operating Sounds

You may hear faint gurgling or bubbling sounds when the refrigerant is pumped through the coils or tubing at the rear, to the cooling plate/evaporator.

When the compressor is on, the refrigerant is being pumped round and you will hear a whirring sound or pulsating noise from the compressor.

A thermostat controls the compressor and you will hear a faint click when the thermostat cuts in and out.

Food Storage

To obtain the best performance from your refrigerator:

Do not store warm food or evaporating liquids.

Do not store food uncovered.

Keep the time between buying chilled food and placing it in your refrigerator as short as possible.

Do not push food together too much, try to allow air to circulate around each item.

2Energy Saving Advice

Do not install the appliance close to sources of heat, such as a cooker, dishwasher or radiator.

Locate the appliance in a cool well ventilated room and make sure that the air openings of the appliance are not obstructed.

Always leave warm food to cool down to room temperature before placing in the fridge.

Try to avoid keeping the door open for long periods or opening the door too frequently as warm air will enter the cabinet and cause the compressor to switch on unnecessarily often.

Ensure there are no obstructions preventing the door from closing properly.

818 19 88-01/8

27

Image 27
Contents Santo 3675-6 KA Berkshire SL 1 1DZ Dear customerHigh Street SloughContents Something Not Working Prior to Installation Important Safety InstructionsChild Safety Old Appliances When disposing of your old applianceEnvironmental Information PackagingBefore Use Appliance TransportRemove the transport fittings from the storage shelves Installation Location InstallationPlease check whether, after installing Refrigerator needs VentilationAppliance Alignment Earth Electrical ConnectionInstallation of the carbon filter Reversing the Door Move the upper bearing pivot to the left View of the appliance Description of the ApplianceButtons for Adjusting the Temperature These buttons are connected to the temperature displayControl Panel Prior to Initial Start-Up Temperature DisplayTemperature Adjustment Initial Start-UpCompressor will start and then run automatically Quick chill Fast Chill buttonTemperature warning Switching the Appliance offOpen Door Warning Opening the Door Holiday ModeInterior Fittings Storage ShelvesSalad Bin Bottle Rack Quick Chill ShelfBottle and Can Holder Dismantling of the Bottle and Can Holder Variable Inner DoorBottle Holder Proper Storage Food Storage Energy Saving AdviceHints and Tips Normal Operating SoundsDefrosting Maintenance and CleaningInternal Cleaning External CleaningChanging the carbon filter Replacing the Light Bulb Light bulb specifications 220-240 V, max W, fitting ESomething Not Working Symptom SolutionRegulations, Standards, Guidelines Refrigerant Circuit Technical TerminologyEuropean Guarantee Guarantee ConditionsCalls may be recorded for training purposes Service & Spare PartsSubject to change without notice