Electrolux SANTO 3675-6 KA manual Control Panel, Buttons for Adjusting the Temperature

Page 17

Description of the Appliance

Control Panel

1ON/OFF button

2Temperature display

3Buttons for adjusting the temperature

4FAST CHILL button and FAST CHILL indicator light (yellow)

• FAST CHILL for intensive cooling in the refrigerator

5WARNING OFF button

Buttons for Adjusting the Temperature

The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons.

These buttons are connected to the temperature display.

•The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER).

•Each time one of the two buttons is pressed again the DESIRED tem- perature is adjusted by 1 °C.

•If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature.

DESIRED temperature means:

The temperature that is required in the freezer compartment, this can be adjusted to the temperatures shown in the display. The DESIRED temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the temperature that is currently present in the freezer compartment. The ACTUAL temperature is indicated with illuminated numbers.

818 19 88-01/8

17

Image 17

Contents Santo 3675-6 KA High Street Dear customerSlough Berkshire SL 1 1DZContents Something Not Working Prior to Installation Important Safety InstructionsChild Safety Environmental Information When disposing of your old appliancePackaging Old AppliancesBefore Use Appliance TransportRemove the transport fittings from the storage shelves Installation Location InstallationAppliance Alignment Please check whether, after installingRefrigerator needs Ventilation Earth Electrical ConnectionInstallation of the carbon filter Reversing the Door Move the upper bearing pivot to the left View of the appliance Description of the ApplianceControl Panel Buttons for Adjusting the TemperatureThese buttons are connected to the temperature display Prior to Initial Start-Up Temperature DisplayCompressor will start and then run automatically Temperature AdjustmentInitial Start-Up Quick chill Fast Chill buttonOpen Door Warning Temperature warningSwitching the Appliance off Opening the Door Holiday ModeSalad Bin Interior FittingsStorage Shelves Bottle and Can Holder Bottle RackQuick Chill Shelf Bottle Holder Dismantling of the Bottle and Can HolderVariable Inner Door Proper Storage Hints and Tips Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningExternal Cleaning DefrostingChanging the carbon filter Replacing the Light Bulb Light bulb specifications 220-240 V, max W, fitting ESomething Not Working Symptom SolutionRegulations, Standards, Guidelines Refrigerant Circuit Technical TerminologyEuropean Guarantee Guarantee ConditionsCalls may be recorded for training purposes Service & Spare PartsSubject to change without notice