Electrolux SANTO 3675-6 KA manual Move the upper bearing pivot to the left

Page 15

Reversing the Door

4.Remove the door fitting on the lower right (1) and reposition the door bearing cover from the lower left to the right of the door (2), place the door fitting supplied in the lower left of the door (3). Carefully remove the door to the front and place on one side.

5.Move the upper bearing pivot to the left.

6.Carefully slide the door onto the top bearing pivot and close.

7.Place the lower door bearing with the hinge bracket pivot in the lower left of the door and fasten.

8.Move the door handle from the left to the right and cover the now vacant holes with the blanking plugs attached.

9.Open the door and fit the plinth cover.

818 19 88-01/8

15

Image 15

Contents Santo 3675-6 KA Berkshire SL 1 1DZ Dear customerHigh Street SloughContents Something Not Working Prior to Installation Important Safety InstructionsChild Safety Old Appliances When disposing of your old applianceEnvironmental Information PackagingBefore Use Appliance TransportRemove the transport fittings from the storage shelves Installation Location InstallationPlease check whether, after installing Refrigerator needs VentilationAppliance Alignment Earth Electrical ConnectionInstallation of the carbon filter Reversing the Door Move the upper bearing pivot to the left View of the appliance Description of the ApplianceButtons for Adjusting the Temperature These buttons are connected to the temperature displayControl Panel Prior to Initial Start-Up Temperature DisplayTemperature Adjustment Initial Start-UpCompressor will start and then run automatically Quick chill Fast Chill buttonTemperature warning Switching the Appliance offOpen Door Warning Opening the Door Holiday ModeInterior Fittings Storage ShelvesSalad Bin Bottle Rack Quick Chill ShelfBottle and Can Holder Dismantling of the Bottle and Can Holder Variable Inner DoorBottle Holder Proper Storage Food Storage Energy Saving AdviceHints and Tips Normal Operating SoundsDefrosting Maintenance and CleaningInternal Cleaning External CleaningChanging the carbon filter Replacing the Light Bulb Light bulb specifications 220-240 V, max W, fitting ESomething Not Working Symptom SolutionRegulations, Standards, Guidelines Refrigerant Circuit Technical TerminologyEuropean Guarantee Guarantee ConditionsCalls may be recorded for training purposes Service & Spare PartsSubject to change without notice