Electrolux SANTO 3675-6 KA Open Door Warning, Temperature warning, Switching the Appliance off

Page 21

"Open Door" Warning

If the fridge door is left open for longer than 5 minutes the red warn- ing display will flash and an acoustic warning tone will sound.

If you need more time to load or rearrange refrigerated foods, you can switch off the warning tone by pressing the WARNING OFF button. The red warning display will go off when the door is closed.

Temperature warning

The red warning light flashes and a warning tone sounds, as soon as the temperature in the refrigerator is warmer than 12 °C. Such a rise in temperature can possibly be put down to:

opening the door a lot or leaving it open for a long time;

storing larger quantities of warm food;

a fault with the appliance.

You can turn off the warning tone using the WARNING OFF button. The warning light and the warning tone switch off automatically, when the ACTUAL temperature existing in the refrigerator drops below 12 °C again.

Switching the Appliance off

01. To switch off, push and hold down the ON/OFF button for approx.

5 seconds. This will result in a countdown from "3" to "1" taking place in the temperature display. On reaching "1" the fridge will switch off. The temperature display will go off.

Note:

The appliance cannot be switched on or off if unplugged, or if there is no power being supplied to it.

Following connection to the mains power supply, the appliance returns to the same operating state as before the interruption of main power.

If the appliance is not going to be used for an extended period:

01. Switch off the appliance, to do this press the ON/OFF button until the display extinguishes (see above).

2.Remove the mains plug or switch off.

3.Clean the appliance thoroughly (see section: "Maintenance and Clean- ing").

4.Leave door open to avoid accumulation of odours.

818 19 88-01/8

21

Image 21
Contents Santo 3675-6 KA High Street Dear customerSlough Berkshire SL 1 1DZContents Something Not Working Prior to Installation Important Safety InstructionsChild Safety Environmental Information When disposing of your old appliancePackaging Old AppliancesBefore Use Appliance TransportRemove the transport fittings from the storage shelves Installation Location InstallationPlease check whether, after installing Refrigerator needs VentilationAppliance Alignment Earth Electrical ConnectionInstallation of the carbon filter Reversing the Door Move the upper bearing pivot to the left View of the appliance Description of the ApplianceButtons for Adjusting the Temperature These buttons are connected to the temperature displayControl Panel Prior to Initial Start-Up Temperature DisplayTemperature Adjustment Initial Start-UpCompressor will start and then run automatically Quick chill Fast Chill buttonTemperature warning Switching the Appliance offOpen Door Warning Opening the Door Holiday ModeInterior Fittings Storage ShelvesSalad Bin Bottle Rack Quick Chill ShelfBottle and Can Holder Dismantling of the Bottle and Can Holder Variable Inner DoorBottle Holder Proper Storage Hints and Tips Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningExternal Cleaning DefrostingChanging the carbon filter Replacing the Light Bulb Light bulb specifications 220-240 V, max W, fitting ESomething Not Working Symptom SolutionRegulations, Standards, Guidelines Refrigerant Circuit Technical TerminologyEuropean Guarantee Guarantee ConditionsCalls may be recorded for training purposes Service & Spare PartsSubject to change without notice