Electrolux SANTO 3675-6 KA manual Reversing the Door

Reversing the Door

The door hinges can be changed from right (as supplied) to left if required to suit the location where the appliance is installed.

1 Warning! Unplug from the mains before reversing the door.

01. Open the door and remove the plinth cover to the front. Move the door bearing cover on the

plinth cover from the left to the right. Close the door.

2.With the door closed, remove the

cross-head screws from the lower door bearing and remove the door hinge bracket downwards.

3. Remove the door fitting from the

door hinge bracket (1, 2). Move 1 the hinge bracket pivot from the

right to the left hand hole (3). Place the door fitting supplied on the hinge bracket pivot (4, 5).

4 5

2

3

14 818 19 88-01/8