Electrolux SANTO 3675-6 KA manual Regulations, Standards, Guidelines

Page 32

Symptom

Solution

 

Ensure the bulb is correctly fitted.

The light does not come on.

Replace the bulb if it has blown.

 

 

Check the door light switch is not

 

jammed.

Noise

Refer to Normal Operating Sounds

The compressor does not start

This is normal, the compressor starts after

immediately after changing the

a period of time.

temperature setting.

 

 

 

If after the above checks there is still a fault, call your local AEG Service Force Centre.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

Please note that proof of purchase is required for in-guarantee service calls.

Regulations, Standards, Guidelines

This appliance was designed for household use and was manufactured in accordance with the appropriate standards. The necessary measures in accordance with appliance safety legislation regulations (GSG), accident prevention regulations for refrigeration appliances (VBG 20) and the regulations of the German Society of Electrical Engineers (VDE) were observed in the manufacture of this appliance.

The refrigerant circuit has been checked for leaks.

;This appliance is in accordance with the following EU guidelines:

73/23/EWG dated 19 February 1973 - low voltage guidelines.

89/336/EWG dated 3 May 1989

(including guideline change notice 92/31/EWG) - EMV guideline

32

818 19 88-01/8

Image 32
Contents Santo 3675-6 KA Dear customer High StreetSlough Berkshire SL 1 1DZContents Something Not Working Important Safety Instructions Prior to InstallationChild Safety When disposing of your old appliance Environmental InformationPackaging Old AppliancesAppliance Transport Before UseRemove the transport fittings from the storage shelves Installation Installation LocationAppliance Alignment Please check whether, after installingRefrigerator needs Ventilation Electrical Connection EarthInstallation of the carbon filter Reversing the Door Move the upper bearing pivot to the left Description of the Appliance View of the applianceControl Panel Buttons for Adjusting the TemperatureThese buttons are connected to the temperature display Temperature Display Prior to Initial Start-UpCompressor will start and then run automatically Temperature AdjustmentInitial Start-Up Fast Chill button Quick chillOpen Door Warning Temperature warningSwitching the Appliance off Holiday Mode Opening the DoorSalad Bin Interior FittingsStorage Shelves Bottle and Can Holder Bottle RackQuick Chill Shelf Bottle Holder Dismantling of the Bottle and Can HolderVariable Inner Door Proper Storage Energy Saving Advice Hints and TipsNormal Operating Sounds Food StorageMaintenance and Cleaning Internal CleaningExternal Cleaning DefrostingChanging the carbon filter Light bulb specifications 220-240 V, max W, fitting E Replacing the Light BulbSymptom Solution Something Not WorkingRegulations, Standards, Guidelines Technical Terminology Refrigerant CircuitGuarantee Conditions European GuaranteeService & Spare Parts Calls may be recorded for training purposesSubject to change without notice