Electrolux SANTO 3675-6 KA manual Holiday Mode, Opening the Door

Page 22

Holiday Mode

In the holiday mode the temperature for the refrigerator is approxi- mately +15 °C. In the holiday mode it is therefore possible to leave the door of the empty refrigerator closed during periods of extended absence. Advantage: Unintentional closing of the door, or accidental closing of the door by persons who have access to your home during your absence, is no longer possible. Without the holiday mode leaving the door closed would lead to the accumulation of odours and mould.

After emptying and cleaning the appliance, proceed as follows:

01. To set the holiday mode, press the „+“ (WARMER) or „-“ (COLDER) but- ton.

The temperature display will change and indicate in flashing numbers the DESIRED temperature that is currently set.

2.Hold down the „+“ (WARMER) button until the temperature display indicates H (for holiday). The temperature shown in the temperature display will change in steps of 1 °C until it reaches +8 °C. After +8 °C the value +15 °C will appear in the display with the letter H. The fridge is now operating in energy-saving holiday mode.

3 Tobutton.switch the fridge back to normal operation, press the „-“ (COLDER)

Important! Do not store any goods in the refrigerator when the holiday mode is in operation. The temperature is regulated at about +15 °C when the holiday mode is in operation. This is too warm for food pro- ducts.

Opening the Door

If the door is closed when the appliance is in operation, it cannot be immediately opened again, because a vacuum occurs which holds the door closed until pressure has been equalised. The door can be opened again after several minutes.

If your appliance is equipped with a QUICK door opener - an opening mechanism integrated into the door handle - the door can be opened easily at any time.

22

818 19 88-01/8

Image 22
Contents Santo 3675-6 KA Slough Dear customerHigh Street Berkshire SL 1 1DZContents Something Not Working Important Safety Instructions Prior to InstallationChild Safety Packaging When disposing of your old applianceEnvironmental Information Old AppliancesAppliance Transport Before UseRemove the transport fittings from the storage shelves Installation Installation LocationRefrigerator needs Ventilation Please check whether, after installingAppliance Alignment Electrical Connection EarthInstallation of the carbon filter Reversing the Door Move the upper bearing pivot to the left Description of the Appliance View of the applianceThese buttons are connected to the temperature display Buttons for Adjusting the TemperatureControl Panel Temperature Display Prior to Initial Start-UpInitial Start-Up Temperature AdjustmentCompressor will start and then run automatically Fast Chill button Quick chillSwitching the Appliance off Temperature warningOpen Door Warning Holiday Mode Opening the DoorStorage Shelves Interior FittingsSalad Bin Quick Chill Shelf Bottle RackBottle and Can Holder Variable Inner Door Dismantling of the Bottle and Can HolderBottle Holder Proper Storage Normal Operating Sounds Energy Saving AdviceHints and Tips Food StorageExternal Cleaning Maintenance and CleaningInternal Cleaning DefrostingChanging the carbon filter Light bulb specifications 220-240 V, max W, fitting E Replacing the Light BulbSymptom Solution Something Not WorkingRegulations, Standards, Guidelines Technical Terminology Refrigerant CircuitGuarantee Conditions European GuaranteeService & Spare Parts Calls may be recorded for training purposesSubject to change without notice