Electrolux SANTO 3675-6 KA manual Remove the transport fittings from the storage shelves

Page 9

Before Use

2.Remove the transport protection pieces and pull off the adhesive tape.

3.Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.

Remove the transport fittings from the storage shelves:

4. Slide the fittings securing the shelf forward to the thicker section on the edge of the storage shelf.

5. Slide the storage shelf far enough forward so that it can be hinged downwards and the fittings can be removed from the guides.

818 19 88-01/8

9

Image 9

Contents Santo 3675-6 KA High Street Dear customerSlough Berkshire SL 1 1DZContents Something Not Working Prior to Installation Important Safety InstructionsChild Safety Environmental Information When disposing of your old appliancePackaging Old AppliancesBefore Use Appliance TransportRemove the transport fittings from the storage shelves Installation Location InstallationPlease check whether, after installing Refrigerator needs VentilationAppliance Alignment Earth Electrical ConnectionInstallation of the carbon filter Reversing the Door Move the upper bearing pivot to the left View of the appliance Description of the ApplianceButtons for Adjusting the Temperature These buttons are connected to the temperature displayControl Panel Prior to Initial Start-Up Temperature DisplayTemperature Adjustment Initial Start-UpCompressor will start and then run automatically Quick chill Fast Chill buttonTemperature warning Switching the Appliance offOpen Door Warning Opening the Door Holiday ModeInterior Fittings Storage ShelvesSalad Bin Bottle Rack Quick Chill ShelfBottle and Can Holder Dismantling of the Bottle and Can Holder Variable Inner DoorBottle Holder Proper Storage Hints and Tips Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningExternal Cleaning DefrostingChanging the carbon filter Replacing the Light Bulb Light bulb specifications 220-240 V, max W, fitting ESomething Not Working Symptom SolutionRegulations, Standards, Guidelines Refrigerant Circuit Technical TerminologyEuropean Guarantee Guarantee ConditionsCalls may be recorded for training purposes Service & Spare PartsSubject to change without notice