Electrolux 20604 G - 21604 Fitting the hob to the worktop, Sealing gasket supplied with, Cut out

Fitting the hob to the worktop

Before fitting the hob into the cut out,
a sealing gasket supplied with the
hob must be fitted to the edge of the
cut out. It is essential that no gaps
are left in this seal in order to prevent
spillage near the hob seeping into the
cabinet below.
Φ	1) Place the sealing gasket	Seal
	all around the edge of the
	cut out.
	2) Place the hob into the cut
	out and secure it by
	means of the relevant
	fixing clamps and screws,	FO0199
	as shown in the diagram.
	3) Remove the excess seal

The edge of the hob forms a double seal which prevents the ingress of liquids.

52