10 www.aeg.com
Display | Description |
|
|
There is a malfunction.
Residual heat indicator: a cooking zone is still hot.
The lock/child safety function is on.
The automatic
ACTIVATING AND DEACTIVATING THE HOB
Touch 
for 2 seconds to activate the
hob. Touch 
for 1 second to deactivate the hob.
ACTIVATING AND DEACTIVATING THE OUTER RINGS
You can align the heating surface with the dimension of the cookware.
To activate the outer ring, touch the sen-
sor field 
or 
. The indicator comes on. For more outer rings touch the same sensor field again. The next indicator comes on.
To deactivate the outer ring, do the same steps again. The indicator goes out.
HEAT SETTING
Touch 
to increase the heat setting. Touch 
to decrease the heat setting. The display shows the heat setting. Touch 
and 
at the same time to deactivate the cooking zone.
AUTOMATIC HEAT UP
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the graphic), and then decreases to the necessary heat setting.
To start the Automatic Heat Up function:
1.Touch 
. 
comes on in the dis- play.
2.Touch 
again and again until 
comes on in the display.
3.Immediately touch 
again and again until the necessary heat setting
comes on. After 3 seconds 
comes on in the display.
To stop the function touch 
.
11 |
|
|
|
|
|
|
|
|
|
10 |
|
|
|
|
|
|
|
|
|
9 |
|
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|
POWER MANAGEMENT
Operating both ovens and the four hob zones at the same time can activate the power management system, which will deactivate one or more of the hob heat- ing zones. This is a power regulation with- in the appliance to prevent a circuit over- load
TIMER
Use it to set an automatic
1.Set the cooking zone. Touch 
again and again until the indicator for the necessary cooking zone comes on.
You must set the cooking zone before you activate the timer.
2.Set the heat setting for the cooking zone. You can also set it after you ac- tivate the timer.
3.To activate the timer or change the set time, touch + or - on the hob con- trol panel. The maximum time you can set is 99 minutes.
The indicator of the cooking zone flashes slowly. The timer starts to count down.