8www.aeg.com
BEFORE FIRST USE
WARNING!
Refer to "Safety information" chapter.
INITIAL CLEANING
•Remove all accessories and removable shelf supports (if applicable).
•Clean the appliance before first use.
Refer to the chapter "Care and cleaning".
SETTING THE TIME
You must set the time before you operate the oven.
When you connect the appliance to the electrical supply or after a power cut, the indicator for the Time function flashes. Press the + or - button to set the correct time.
After approximately five seconds, the flashing stops and the display shows the time of day you set.
You can only change the time 
if :
•The child safety device is not on.
•None of the clock functions Du- ration 
or End 
is set.
•No oven function is set.
PREHEATING
Preheat the empty appliance to burn off the remaining grease.
1.Set the function 
and the maximum temperature.
2.Let the appliance operate for one hour.
3.Set the function 
and the maximum temperature.
4.Let the appliance operate for ten mi- nutes.
5.Set the function 
and the maximum temperature.
6.Let the appliance operate for ten mi- nutes.
Accessories can become hotter than usu- ally. The appliance can emit an odour and
smoke. This is normal. Make sure that the airflow is sufficient.