4.To see the remaining time, touch 
again and again until the indicator for the necessary cooking zone flashes quickly. The display shows the re- maining time.
When the set time ends, 00 flashes and an acoustic signal sounds. The cooking zone deactivates.
5.Touch 
to stop the signal.
To deactivate the timer before the set time is completed, set the
cooking zone with 
and touch
You can use the timer as a Minute Minder when the cooking zones do not operate. To do this, set the cooking zone and acti- vate the timer but do not set the heat set- ting.
STOP AND GO
The Stop and Go 
function sets all cooking zones that operate to the lowest
heat setting ( 
).
This function does not deactivate the tim- er function.
•To activate this function, touch 
. The display shows the symbol 
.
•To deactivate this function, touch 
. The display shows the heat setting that you set before.
When the Stop and Go function operates, you cannot change the heat settings.
LOCK
When the cooking zones operate, you can
lock the control panel but not 
. It pre- vents an accidental change of the heat setting.
This function does not deactivate the tim- er function.
1.Set the heat setting.
2.To activate this function, touch 
. The display shows the symbol 
for 4 seconds.
3.To deactivate this function, touch 
. The display shows the heat setting that you set before.
ENGLISH 11
When you deactivate the appli- ance, the function is deactivated.
When you activate the appliance, the dis- play shows SAFE .
The lock function locks or unlocks the oven interface at the same time.
RESIDUAL HEAT INDICATOR
The residual heat indicator comes on when a cooking zone is hot.
WARNING!
There is a risk of burns from resid- ual heat.
CHILD SAFETY DEVICE
This function prevents an accidental oper- ation of the hob.
Activating the child safety device
1.Touch 
to activate the hob. Do not set the heat settings.
2.Touch 
for 4 seconds. The display shows the symbol 
. The child safe- ty device operates.
3.Touch 
to deactivate the hob.
Deactivating the child safety device
1.Touch 
to activate the hob. Do not set the heat settings.
2.Touch 
for 4 seconds. The display shows the symbol 
.
3.Touch 
to deactivate the hob.
Overriding the child safety device for one cooking session
1.Touch 
to activate the hob. The display shows the symbol 
.
2.Touch 
for 4 seconds.
3.Set the heat settings in less than 10 seconds. You can operate the hob.
4.When you deactivate the hob, the child safety device operates again.
The child safety device function locks the hob and oven at this same time.
AUTOMATIC SWITCH-OFF
The hob deactivates automatically if: