Oven Care and Cleaning, Shelf Supports

32 www.aeg.com

OVEN - CARE AND CLEANING

WARNING!

Refer to "Safety information" chapter.

•Clean the front of the appliance with a soft cloth with warm water and cleaning agent.

•To clean metal surfaces, use a usual cleaning agent

•Clean the oven interior after each use. Then you can remove dirt more easily and it does not burn on.

•Clean stubborn dirt with a special oven cleaner.

•Clean all oven accessories after each use and let them dry. Use a soft cloth with warm water and a cleaning agent.

•If you have nonstick accessories, do not clean them using aggressive agents, sharp-edged objects or a dishwasher. It can destroy the nonstick coating.

Stainless steel or aluminium ap- pliances

Clean the oven door with a wet sponge only. Dry it with a soft cloth.

Do not use steel wool, acids or abrasive materials as they can damage the oven surface. Clean the oven control panel with the same precautions.

which collects on walls while the oven op- erates.

To support this self-cleaning process, heat the oven without any food regularly:

•Turn the oven light on.

•Remove accessories from the oven.

•Select an oven function.

•Set the oven temperature to 250 °C and let the oven operate for 1 hour.

•Clean the oven cavity with a soft and damp sponge.

WARNING!

Do not attempt to clean the cata- lytic surface with oven sprays, abrasive cleaners, soap or other cleaning agents. This will damage the catalytic surface.

Discolouration of the catalytic sur- face has no effect on the catalytic properties.

SHELF SUPPORTS

You can remove the shelf supports to clean the side walls.

CATALYTIC WALLS AND

ROOF

The walls and the roof with catalytic coat- ing are self-cleaning. They absorb fat

Removing the shelf supports

1. Pull the front of the shelf support away from the side wall.