Electrolux PE 9038-m fww installation instructions Hardness of water, 10/35

Hardness of water:

•Before filling up the water reservoir, make sure that the decalcifying Brita filter has been soaked in cold water for at least 30 min. Follow the instructions printed on the filter package. After this operation insert the filter into position inside the water reservoir as shown in the figure.

•If the machine will not be used for long periods, empty the water from tank.

•Brita filters are available from most supermarkets and domestic goods outlets, at our After-Sales Service Centres or at the Shops of Authorized Spare Parts.

•Remove the reservoir and fill it with approximately 2.5 litres of water as shown.

•replace the water reservoir in its own housing taking care to fully engage the water valve into the docking station.

10/35