Electrolux PE 9038-m fww Filling Up The Container With Coffee Beans, 11/35

Page 11

•Ensure the mains ON/OFF switch(at rear) is ON

•push the machine back into the housing until a “CLICK” can be heard. This indicate that the machine has been locked in position.

FILLING UP THE CONTAINER WITH COFFEE BEANS

•Press the unlocking levers located under the drip tray and pull the machine as it is shown in the figure.

•pull the coffee machine forward from the housing along the telescopic runners .

11/35

Image 11

Contents Fully automatic espresso coffee machine Operating and Installation InstructionsPE 9038-m ENGLISH CONTENTS Prior to initial start-up 1. SAFETY INSTRUCTIONSafety of children Intended usePACKAGE FOR INSTALLATION AND SERVICINGSOME HINTS OF ENVIRONMENTAL PROTECTION 5/35 ELECTRICAL CONNECTIONWARNING THIS APPLIANCE MUST BE EARTHED 6/35 PERMANENT CONNECTION7. Grinding regulation knob 8. Control panel 9. “Used” coffee drawer 2. DESCRIPTION OF THE COFFEE MACHINE1. Water reservoir 2. Brita filter 3. Coffee Outlet 4. Steam/water nozzle 5. Drip tray 6. Coffee beans containerTOUCH CONTROLS Instructions for use 3. DESCRIPTION OF THE CONTROL PANEL TOUCH CONTROLS9/35 4 INSTRUCTIONS FOR THE FIRST USE OF THE MACHINEFILLING UP THE WATER RESERVOIR 10/35 Hardness of water11/35 FILLING UP THE CONTAINER WITH COFFEE BEANS12/35 INITIAL START-UP13/35 ADJUSTING THE TEXTURE GROUND COFFEE14/35 15/35 STAND-BY MODE16/35 HOW TO OBTAIN AN EXCELLENT ESPRESSO5 MAKING COFFEE 17/35 6 HOT WATERHEATING LIQUIDS 7 STEAM19/35 8 PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE GRINDED20/35 21/35 9 PROGRAMMING THE VOLUME OF COFFEE DISPENSED IN THE CUP22/35 10 IF YOU WISH TO RESET THE STANDARD VALUESRESETTING STANDARD VALUES “USED COFFEE DRAWER FULL”/ COFFEE BEENS REFILL INDICATOR 11 SIGNAL AND ALARMSWATER REFILL INDICATOR VOLUMETER COUNTER FAULTVIENNESE CAPPUCCINO FAULT INDICATOR12 COFFEE MENUS ITALIAN CAPPUCCINO25/35 13 CLEANINGOUTER PARTS STEAM NOZZLE26/35 DRIP TRAYTO EMPTY THE “USED” COFFEE DRAWER 27/35 Pull open the door and remove the drawer and empty itReplace the drawer and close the door Replace the drip tray 28/35 CLEANING CYCLE OF THE BOILERWATER RESERVOIR 29/35 14 INSTALLATIONCOMPONENTS FOR INSTALLING THE MACHINE BUILDING-IN30/35 Fix the power cable onto the machine as shown in the figureUnscrew the cable clamp available on the machine 31/35 INSTALLING THE MACHINE32/35 33/35 16 TECHNICAL SPECIFICATIONS15 SOMETHING NOT WORKING CUSTOMER CARE 17 AFTER-SALES SERVICE, SPARE PARTS AND GUARANTEESERVICE & SPARE PARTS 08705 92935/35 GUARANTEE CONDITIONSEUROPEAN GUARANTEE 04501150 AEG Hausgeräte GmbH Postfach D-90327 NürnbergCopyright by AEG