Electrolux PE 9038-m fww For Installation And Servicing, Some Hints Of Environmental Protection

Page 4

FOR INSTALLATION AND SERVICING

Keep this instruction manual together with the machine for any future reference. If the machine is sold or transferred to another person, make sure that this instruction manual is given to the new user, so that he/she can become familiar with the machine’s functions and with the recommendations given.

This machine must be installed and connected to the mains by a COMPETENT PERSON. Make sure that the machine is DISCONNECTED from the power supply before any servicing operation.

After unpacking the machine make sure that the product has not suffered any damage and that the power cord is in perfect condition. In case of damage, please contact your retailer or our customer service dept.

The Manufacturer declines all responsibility if the safety rules are not complied with.

SOME HINTS OF ENVIRONMENTAL PROTECTION

PACKAGE

All the packing materials are environmentally friendly and they can be recycled. Please help in preserving the environment, by using the proper channels of

separate collection of rubbish.

DISPOSAL

Appliance Packaging Information All materials are environmentally sound.

The plastics can be recycled and are identifìed as follows:

>PE< for polyethylene, e.g. the outer covering and the bags in the interior.

>PS< for polystyrene foam, e.g. the pads, which are all free of chlorofluorocarbon. The carton parts are made from recycled paper and should be disposed of at a waste- paper recycling collection location.

Disposal of Old Appliances

• Use an authorised disposal site.

Contact your Local Council or Environmental Health Office to see if there are facilities in your area to recycle the appliance.

The symbol FOR INSTALLATION AND SERVICING on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product

4/35

Image 4
Contents PE 9038-m Operating and Installation InstructionsFully automatic espresso coffee machine ENGLISH CONTENTS 1. SAFETY INSTRUCTION Safety of childrenIntended use Prior to initial start-upSOME HINTS OF ENVIRONMENTAL PROTECTION FOR INSTALLATION AND SERVICINGPACKAGE WARNING THIS APPLIANCE MUST BE EARTHED ELECTRICAL CONNECTION5/35 PERMANENT CONNECTION 6/352. DESCRIPTION OF THE COFFEE MACHINE 1. Water reservoir 2. Brita filter 3. Coffee Outlet4. Steam/water nozzle 5. Drip tray 6. Coffee beans container 7. Grinding regulation knob 8. Control panel 9. “Used” coffee drawer3. DESCRIPTION OF THE CONTROL PANEL TOUCH CONTROLS TOUCH CONTROLS Instructions for useFILLING UP THE WATER RESERVOIR 4 INSTRUCTIONS FOR THE FIRST USE OF THE MACHINE9/35 Hardness of water 10/35FILLING UP THE CONTAINER WITH COFFEE BEANS 11/35INITIAL START-UP 12/35ADJUSTING THE TEXTURE GROUND COFFEE 13/3514/35 STAND-BY MODE 15/355 MAKING COFFEE HOW TO OBTAIN AN EXCELLENT ESPRESSO16/35 6 HOT WATER 17/357 STEAM HEATING LIQUIDS8 PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE GRINDED 19/3520/35 9 PROGRAMMING THE VOLUME OF COFFEE DISPENSED IN THE CUP 21/35RESETTING STANDARD VALUES 10 IF YOU WISH TO RESET THE STANDARD VALUES22/35 11 SIGNAL AND ALARMS WATER REFILL INDICATORVOLUMETER COUNTER FAULT “USED COFFEE DRAWER FULL”/ COFFEE BEENS REFILL INDICATORFAULT INDICATOR 12 COFFEE MENUSITALIAN CAPPUCCINO VIENNESE CAPPUCCINO13 CLEANING OUTER PARTSSTEAM NOZZLE 25/35TO EMPTY THE “USED” COFFEE DRAWER DRIP TRAY26/35 Replace the drawer and close the door Replace the drip tray Pull open the door and remove the drawer and empty it27/35 WATER RESERVOIR CLEANING CYCLE OF THE BOILER28/35 14 INSTALLATION COMPONENTS FOR INSTALLING THE MACHINEBUILDING-IN 29/35Unscrew the cable clamp available on the machine Fix the power cable onto the machine as shown in the figure30/35 INSTALLING THE MACHINE 31/3532/35 15 SOMETHING NOT WORKING 16 TECHNICAL SPECIFICATIONS33/35 17 AFTER-SALES SERVICE, SPARE PARTS AND GUARANTEE SERVICE & SPARE PARTS08705 929 CUSTOMER CAREEUROPEAN GUARANTEE GUARANTEE CONDITIONS35/35 Copyright by AEG AEG Hausgeräte GmbH Postfach D-90327 Nürnberg04501150