Electrolux PE 9038-m fww installation instructions Installing The Machine, 31/35

Page 31

•Connect the power cable as shown in the figure. This machine is designed for a single phase voltage of 230V. The power supply requires only outlets of 13A fuse and a double pole isolation switch with at least 3 mm between contacts.

INSTALLING THE MACHINE

•Lay the U base plate of the machine on the shelf of the cabinet.

•Ιnsert the L plates, compensating for any space. The width of the housing unit the coffee machine depends on the thickness of the cabinet’s sides. six side plates (four being 2 mm thick and two 1 mm thick) are provided to compensate for the different possible measures.

31/35

Image 31

Contents PE 9038-m Operating and Installation InstructionsFully automatic espresso coffee machine ENGLISH CONTENTS Prior to initial start-up 1. SAFETY INSTRUCTIONSafety of children Intended useSOME HINTS OF ENVIRONMENTAL PROTECTION FOR INSTALLATION AND SERVICINGPACKAGE WARNING THIS APPLIANCE MUST BE EARTHED ELECTRICAL CONNECTION5/35 6/35 PERMANENT CONNECTION7. Grinding regulation knob 8. Control panel 9. “Used” coffee drawer 2. DESCRIPTION OF THE COFFEE MACHINE1. Water reservoir 2. Brita filter 3. Coffee Outlet 4. Steam/water nozzle 5. Drip tray 6. Coffee beans containerTOUCH CONTROLS Instructions for use 3. DESCRIPTION OF THE CONTROL PANEL TOUCH CONTROLSFILLING UP THE WATER RESERVOIR 4 INSTRUCTIONS FOR THE FIRST USE OF THE MACHINE9/35 10/35 Hardness of water11/35 FILLING UP THE CONTAINER WITH COFFEE BEANS12/35 INITIAL START-UP13/35 ADJUSTING THE TEXTURE GROUND COFFEE14/35 15/35 STAND-BY MODE5 MAKING COFFEE HOW TO OBTAIN AN EXCELLENT ESPRESSO16/35 17/35 6 HOT WATERHEATING LIQUIDS 7 STEAM19/35 8 PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE GRINDED20/35 21/35 9 PROGRAMMING THE VOLUME OF COFFEE DISPENSED IN THE CUPRESETTING STANDARD VALUES 10 IF YOU WISH TO RESET THE STANDARD VALUES22/35 “USED COFFEE DRAWER FULL”/ COFFEE BEENS REFILL INDICATOR 11 SIGNAL AND ALARMSWATER REFILL INDICATOR VOLUMETER COUNTER FAULTVIENNESE CAPPUCCINO FAULT INDICATOR12 COFFEE MENUS ITALIAN CAPPUCCINO25/35 13 CLEANINGOUTER PARTS STEAM NOZZLETO EMPTY THE “USED” COFFEE DRAWER DRIP TRAY26/35 Replace the drawer and close the door Replace the drip tray Pull open the door and remove the drawer and empty it27/35 WATER RESERVOIR CLEANING CYCLE OF THE BOILER28/35 29/35 14 INSTALLATIONCOMPONENTS FOR INSTALLING THE MACHINE BUILDING-INUnscrew the cable clamp available on the machine Fix the power cable onto the machine as shown in the figure30/35 31/35 INSTALLING THE MACHINE32/35 15 SOMETHING NOT WORKING 16 TECHNICAL SPECIFICATIONS33/35 CUSTOMER CARE 17 AFTER-SALES SERVICE, SPARE PARTS AND GUARANTEESERVICE & SPARE PARTS 08705 929EUROPEAN GUARANTEE GUARANTEE CONDITIONS35/35 Copyright by AEG AEG Hausgeräte GmbH Postfach D-90327 Nürnberg04501150