Electrolux PE 9038-m fww installation instructions Stand-By Mode, 15/35

Page 15

STAND-BY MODE

•Once powered and inserted into the cabinet, the machine is in stand-by mode: this will be signaled by the on/off LED blinking.

•Press the start control to switch on the machine: the start LED will be illuminated.

•To come back to the stand-by mode, press the start control once again.

CAUTION:

On start-up, the machine initiates the pre-warming phase for the first 3 minutes. During this phase the ON/OFF LED will blink quickly and the machine will be not able to execute any operation. Then the LED blinks slowly and the machine is ready to operate.

15/35

Image 15

Contents Operating and Installation Instructions PE 9038-mFully automatic espresso coffee machine ENGLISH CONTENTS Prior to initial start-up 1. SAFETY INSTRUCTIONSafety of children Intended useFOR INSTALLATION AND SERVICING SOME HINTS OF ENVIRONMENTAL PROTECTIONPACKAGE ELECTRICAL CONNECTION WARNING THIS APPLIANCE MUST BE EARTHED5/35 6/35 PERMANENT CONNECTION7. Grinding regulation knob 8. Control panel 9. “Used” coffee drawer 2. DESCRIPTION OF THE COFFEE MACHINE1. Water reservoir 2. Brita filter 3. Coffee Outlet 4. Steam/water nozzle 5. Drip tray 6. Coffee beans containerTOUCH CONTROLS Instructions for use 3. DESCRIPTION OF THE CONTROL PANEL TOUCH CONTROLS4 INSTRUCTIONS FOR THE FIRST USE OF THE MACHINE FILLING UP THE WATER RESERVOIR9/35 10/35 Hardness of water11/35 FILLING UP THE CONTAINER WITH COFFEE BEANS12/35 INITIAL START-UP13/35 ADJUSTING THE TEXTURE GROUND COFFEE14/35 15/35 STAND-BY MODEHOW TO OBTAIN AN EXCELLENT ESPRESSO 5 MAKING COFFEE16/35 17/35 6 HOT WATERHEATING LIQUIDS 7 STEAM19/35 8 PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE GRINDED20/35 21/35 9 PROGRAMMING THE VOLUME OF COFFEE DISPENSED IN THE CUP10 IF YOU WISH TO RESET THE STANDARD VALUES RESETTING STANDARD VALUES22/35 “USED COFFEE DRAWER FULL”/ COFFEE BEENS REFILL INDICATOR 11 SIGNAL AND ALARMSWATER REFILL INDICATOR VOLUMETER COUNTER FAULTVIENNESE CAPPUCCINO FAULT INDICATOR12 COFFEE MENUS ITALIAN CAPPUCCINO25/35 13 CLEANINGOUTER PARTS STEAM NOZZLEDRIP TRAY TO EMPTY THE “USED” COFFEE DRAWER26/35 Pull open the door and remove the drawer and empty it Replace the drawer and close the door Replace the drip tray27/35 CLEANING CYCLE OF THE BOILER WATER RESERVOIR28/35 29/35 14 INSTALLATIONCOMPONENTS FOR INSTALLING THE MACHINE BUILDING-INFix the power cable onto the machine as shown in the figure Unscrew the cable clamp available on the machine30/35 31/35 INSTALLING THE MACHINE32/35 16 TECHNICAL SPECIFICATIONS 15 SOMETHING NOT WORKING33/35 CUSTOMER CARE 17 AFTER-SALES SERVICE, SPARE PARTS AND GUARANTEESERVICE & SPARE PARTS 08705 929GUARANTEE CONDITIONS EUROPEAN GUARANTEE35/35 AEG Hausgeräte GmbH Postfach D-90327 Nürnberg Copyright by AEG04501150