Electrolux PE 9038-m fww Water Reservoir, Cleaning Cycle Of The Boiler, 28/35

Page 28

WATER RESERVOIR

If the machine is not used for long periods, change the water in the reservoir and drain the boiler by pressing the coffee button several times.

Clean the water reservoir periodically .

The water reservoir can be washed in a dishwasher.

When using the Brita filter, replace it after approximately 2000 cups of coffee or at least every three months.

CLEANING CYCLE OF THE BOILER

This coffee machine is an appliance using water, therefore it is normal that some limescale can form in its boiler.

It is recommended to carry out the following operations every six months:

Fill up the water reservoir with 2 litres of water adding half a glass of vinegar or citric acid.

Carry out the same operations as preparing some cups of coffee (refer to the previous Chapter “Coffee”), and some cups of hot water until the reservoir is completely empty.

Fill the reservoir again with cold water and repeat the above process to rinse the boiler.

28/35

Image 28
Contents PE 9038-m Operating and Installation InstructionsFully automatic espresso coffee machine ENGLISH CONTENTS 1. SAFETY INSTRUCTION Safety of childrenIntended use Prior to initial start-upSOME HINTS OF ENVIRONMENTAL PROTECTION FOR INSTALLATION AND SERVICINGPACKAGE WARNING THIS APPLIANCE MUST BE EARTHED ELECTRICAL CONNECTION5/35 PERMANENT CONNECTION 6/352. DESCRIPTION OF THE COFFEE MACHINE 1. Water reservoir 2. Brita filter 3. Coffee Outlet4. Steam/water nozzle 5. Drip tray 6. Coffee beans container 7. Grinding regulation knob 8. Control panel 9. “Used” coffee drawer3. DESCRIPTION OF THE CONTROL PANEL TOUCH CONTROLS TOUCH CONTROLS Instructions for useFILLING UP THE WATER RESERVOIR 4 INSTRUCTIONS FOR THE FIRST USE OF THE MACHINE9/35 Hardness of water 10/35FILLING UP THE CONTAINER WITH COFFEE BEANS 11/35INITIAL START-UP 12/35ADJUSTING THE TEXTURE GROUND COFFEE 13/3514/35 STAND-BY MODE 15/355 MAKING COFFEE HOW TO OBTAIN AN EXCELLENT ESPRESSO16/35 6 HOT WATER 17/357 STEAM HEATING LIQUIDS8 PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE GRINDED 19/3520/35 9 PROGRAMMING THE VOLUME OF COFFEE DISPENSED IN THE CUP 21/35RESETTING STANDARD VALUES 10 IF YOU WISH TO RESET THE STANDARD VALUES22/35 11 SIGNAL AND ALARMS WATER REFILL INDICATORVOLUMETER COUNTER FAULT “USED COFFEE DRAWER FULL”/ COFFEE BEENS REFILL INDICATORFAULT INDICATOR 12 COFFEE MENUSITALIAN CAPPUCCINO VIENNESE CAPPUCCINO13 CLEANING OUTER PARTSSTEAM NOZZLE 25/35TO EMPTY THE “USED” COFFEE DRAWER DRIP TRAY26/35 Replace the drawer and close the door Replace the drip tray Pull open the door and remove the drawer and empty it27/35 WATER RESERVOIR CLEANING CYCLE OF THE BOILER28/35 14 INSTALLATION COMPONENTS FOR INSTALLING THE MACHINEBUILDING-IN 29/35Unscrew the cable clamp available on the machine Fix the power cable onto the machine as shown in the figure30/35 INSTALLING THE MACHINE 31/3532/35 15 SOMETHING NOT WORKING 16 TECHNICAL SPECIFICATIONS33/35 17 AFTER-SALES SERVICE, SPARE PARTS AND GUARANTEE SERVICE & SPARE PARTS08705 929 CUSTOMER CAREEUROPEAN GUARANTEE GUARANTEE CONDITIONS35/35 Copyright by AEG AEG Hausgeräte GmbH Postfach D-90327 Nürnberg04501150