Electrolux PE 9038-m fww Something Not Working, Technical Specifications, 33/35

Page 33

•Slide the machine into the cabinet until the “click” indicates that it is locked into Position.

15 SOMETHING NOT WORKING.....

If this machine does not work, please make sure that the fault is not due to:

1.no power

2.no water in the reservoir.

If the power cable is damaged or the machine needs servicing, please contact the nearest SERVICE FORCE CENTRE

16 TECHNICAL SPECIFICATIONS

•	Width	594 mm
•	Depth	475 mm
•	Height	378 mm
• Capacity of water reservoir		2.5 l
•	Net weight	28 kg
•	Gross weight	31 kg
•	Supply voltage	230 V
•	Rated power	2000 W
• Power absorbed by the heating element		1700 W
• Power absorbed by the pump		50 W
•	Working pressure	12 bar
•	Fuse	13 A

33/35

Image 33

Contents Operating and Installation Instructions PE 9038-mFully automatic espresso coffee machine ENGLISH CONTENTS Safety of children 1. SAFETY INSTRUCTIONIntended use Prior to initial start-upFOR INSTALLATION AND SERVICING SOME HINTS OF ENVIRONMENTAL PROTECTIONPACKAGE ELECTRICAL CONNECTION WARNING THIS APPLIANCE MUST BE EARTHED5/35 6/35 PERMANENT CONNECTION1. Water reservoir 2. Brita filter 3. Coffee Outlet 2. DESCRIPTION OF THE COFFEE MACHINE4. Steam/water nozzle 5. Drip tray 6. Coffee beans container 7. Grinding regulation knob 8. Control panel 9. “Used” coffee drawerTOUCH CONTROLS Instructions for use 3. DESCRIPTION OF THE CONTROL PANEL TOUCH CONTROLS4 INSTRUCTIONS FOR THE FIRST USE OF THE MACHINE FILLING UP THE WATER RESERVOIR9/35 10/35 Hardness of water11/35 FILLING UP THE CONTAINER WITH COFFEE BEANS12/35 INITIAL START-UP13/35 ADJUSTING THE TEXTURE GROUND COFFEE14/35 15/35 STAND-BY MODEHOW TO OBTAIN AN EXCELLENT ESPRESSO 5 MAKING COFFEE16/35 17/35 6 HOT WATERHEATING LIQUIDS 7 STEAM19/35 8 PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE GRINDED20/35 21/35 9 PROGRAMMING THE VOLUME OF COFFEE DISPENSED IN THE CUP10 IF YOU WISH TO RESET THE STANDARD VALUES RESETTING STANDARD VALUES22/35 WATER REFILL INDICATOR 11 SIGNAL AND ALARMSVOLUMETER COUNTER FAULT “USED COFFEE DRAWER FULL”/ COFFEE BEENS REFILL INDICATOR12 COFFEE MENUS FAULT INDICATORITALIAN CAPPUCCINO VIENNESE CAPPUCCINOOUTER PARTS 13 CLEANINGSTEAM NOZZLE 25/35DRIP TRAY TO EMPTY THE “USED” COFFEE DRAWER26/35 Pull open the door and remove the drawer and empty it Replace the drawer and close the door Replace the drip tray27/35 CLEANING CYCLE OF THE BOILER WATER RESERVOIR28/35 COMPONENTS FOR INSTALLING THE MACHINE 14 INSTALLATIONBUILDING-IN 29/35Fix the power cable onto the machine as shown in the figure Unscrew the cable clamp available on the machine30/35 31/35 INSTALLING THE MACHINE32/35 16 TECHNICAL SPECIFICATIONS 15 SOMETHING NOT WORKING33/35 SERVICE & SPARE PARTS 17 AFTER-SALES SERVICE, SPARE PARTS AND GUARANTEE08705 929 CUSTOMER CAREGUARANTEE CONDITIONS EUROPEAN GUARANTEE35/35 AEG Hausgeräte GmbH Postfach D-90327 Nürnberg Copyright by AEG04501150