Electrolux PE 9038-m fww installation instructions 20/35

Page 20
20/35

Once you have modified the coffee ground quantity, press the start control for 10 seconds and the machine will automatically save the quantity desired and it will return to stand-by mode.

Manual background CAUTION: the correct grinding time can change if a different kind of coffee is used.

If any unpressed coffee powder is found when emptying the “used” coffee drawer, it means that the grinding time is too long and should be decreased.

The “exhaust” coffee pods in the “used” coffee drawer can help to achieve a correct regulation of the grinding-time.

The coffee pods must be 1 cm in thickness: this is the correct coffee quantity.

If its thickness is lower, it means that the grinding time is too short and should be increased.

Manual background IMPORTANT: Increasing or decreasing the grinding time can change the coffee taste.

A stronger coffee taste and a rich aroma can be obtained by slightly increasing the programmed time.

A weaker coffee can be obtained by slightly decreasing the programmed time.

20/35

Image 20
Contents Fully automatic espresso coffee machine Operating and Installation InstructionsPE 9038-m ENGLISH CONTENTS 1. SAFETY INSTRUCTION Safety of childrenIntended use Prior to initial start-upPACKAGE FOR INSTALLATION AND SERVICINGSOME HINTS OF ENVIRONMENTAL PROTECTION 5/35 ELECTRICAL CONNECTIONWARNING THIS APPLIANCE MUST BE EARTHED PERMANENT CONNECTION 6/352. DESCRIPTION OF THE COFFEE MACHINE 1. Water reservoir 2. Brita filter 3. Coffee Outlet4. Steam/water nozzle 5. Drip tray 6. Coffee beans container 7. Grinding regulation knob 8. Control panel 9. “Used” coffee drawer3. DESCRIPTION OF THE CONTROL PANEL TOUCH CONTROLS TOUCH CONTROLS Instructions for use9/35 4 INSTRUCTIONS FOR THE FIRST USE OF THE MACHINEFILLING UP THE WATER RESERVOIR Hardness of water 10/35FILLING UP THE CONTAINER WITH COFFEE BEANS 11/35INITIAL START-UP 12/35ADJUSTING THE TEXTURE GROUND COFFEE 13/3514/35 STAND-BY MODE 15/3516/35 HOW TO OBTAIN AN EXCELLENT ESPRESSO5 MAKING COFFEE 6 HOT WATER 17/357 STEAM HEATING LIQUIDS8 PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE GRINDED 19/3520/35 9 PROGRAMMING THE VOLUME OF COFFEE DISPENSED IN THE CUP 21/3522/35 10 IF YOU WISH TO RESET THE STANDARD VALUESRESETTING STANDARD VALUES 11 SIGNAL AND ALARMS WATER REFILL INDICATORVOLUMETER COUNTER FAULT “USED COFFEE DRAWER FULL”/ COFFEE BEENS REFILL INDICATORFAULT INDICATOR 12 COFFEE MENUSITALIAN CAPPUCCINO VIENNESE CAPPUCCINO13 CLEANING OUTER PARTSSTEAM NOZZLE 25/3526/35 DRIP TRAYTO EMPTY THE “USED” COFFEE DRAWER 27/35 Pull open the door and remove the drawer and empty itReplace the drawer and close the door Replace the drip tray 28/35 CLEANING CYCLE OF THE BOILERWATER RESERVOIR 14 INSTALLATION COMPONENTS FOR INSTALLING THE MACHINEBUILDING-IN 29/3530/35 Fix the power cable onto the machine as shown in the figureUnscrew the cable clamp available on the machine INSTALLING THE MACHINE 31/3532/35 33/35 16 TECHNICAL SPECIFICATIONS15 SOMETHING NOT WORKING 17 AFTER-SALES SERVICE, SPARE PARTS AND GUARANTEE SERVICE & SPARE PARTS08705 929 CUSTOMER CARE35/35 GUARANTEE CONDITIONSEUROPEAN GUARANTEE 04501150 AEG Hausgeräte GmbH Postfach D-90327 NürnbergCopyright by AEG