Electrolux PE 9038-m fww installation instructions Hot Water, 17/35

Page 17

6 HOT WATER

•The steam/water pipe can be moved to the back of the cabinet when not in use. Pull forward when required.

Do not touch when HOT!

•To dispense hot water, place a container under the steam/water nozzle; then press the water control.

•Press and hold the start control within 10 seconds until the desired amount is dispensed. To stop the water flowing, simply release the control.

CAUTION: the desired function will be disabled if the start control is not pressed within 10 seconds. It will then be necessary to repeat the procedure.

17/35

Image 17

Contents Fully automatic espresso coffee machine Operating and Installation InstructionsPE 9038-m ENGLISH CONTENTS Safety of children 1. SAFETY INSTRUCTIONIntended use Prior to initial start-upPACKAGE FOR INSTALLATION AND SERVICINGSOME HINTS OF ENVIRONMENTAL PROTECTION 5/35 ELECTRICAL CONNECTIONWARNING THIS APPLIANCE MUST BE EARTHED 6/35 PERMANENT CONNECTION1. Water reservoir 2. Brita filter 3. Coffee Outlet 2. DESCRIPTION OF THE COFFEE MACHINE4. Steam/water nozzle 5. Drip tray 6. Coffee beans container 7. Grinding regulation knob 8. Control panel 9. “Used” coffee drawerTOUCH CONTROLS Instructions for use 3. DESCRIPTION OF THE CONTROL PANEL TOUCH CONTROLS9/35 4 INSTRUCTIONS FOR THE FIRST USE OF THE MACHINEFILLING UP THE WATER RESERVOIR 10/35 Hardness of water11/35 FILLING UP THE CONTAINER WITH COFFEE BEANS12/35 INITIAL START-UP13/35 ADJUSTING THE TEXTURE GROUND COFFEE14/35 15/35 STAND-BY MODE16/35 HOW TO OBTAIN AN EXCELLENT ESPRESSO5 MAKING COFFEE 17/35 6 HOT WATERHEATING LIQUIDS 7 STEAM19/35 8 PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE GRINDED20/35 21/35 9 PROGRAMMING THE VOLUME OF COFFEE DISPENSED IN THE CUP22/35 10 IF YOU WISH TO RESET THE STANDARD VALUESRESETTING STANDARD VALUES WATER REFILL INDICATOR 11 SIGNAL AND ALARMSVOLUMETER COUNTER FAULT “USED COFFEE DRAWER FULL”/ COFFEE BEENS REFILL INDICATOR12 COFFEE MENUS FAULT INDICATORITALIAN CAPPUCCINO VIENNESE CAPPUCCINOOUTER PARTS 13 CLEANINGSTEAM NOZZLE 25/3526/35 DRIP TRAYTO EMPTY THE “USED” COFFEE DRAWER 27/35 Pull open the door and remove the drawer and empty itReplace the drawer and close the door Replace the drip tray 28/35 CLEANING CYCLE OF THE BOILERWATER RESERVOIR COMPONENTS FOR INSTALLING THE MACHINE 14 INSTALLATIONBUILDING-IN 29/3530/35 Fix the power cable onto the machine as shown in the figureUnscrew the cable clamp available on the machine 31/35 INSTALLING THE MACHINE32/35 33/35 16 TECHNICAL SPECIFICATIONS15 SOMETHING NOT WORKING SERVICE & SPARE PARTS 17 AFTER-SALES SERVICE, SPARE PARTS AND GUARANTEE08705 929 CUSTOMER CARE35/35 GUARANTEE CONDITIONSEUROPEAN GUARANTEE 04501150 AEG Hausgeräte GmbH Postfach D-90327 NürnbergCopyright by AEG