Self-Clean Cycle, To start the Self-Clean cycle

Cleaning and Maintenance

Self-Clean Cycle

This ov en features an automatic pyrolytic self -cleaning cy cle. During thiscycle, the oven reacheselevatedtemperatures in order to burn off soil and deposits. An integral smoke eliminator helps reduce od ors associatedwith the s oil burn-off. A powder a sh residue isleft ni the bottom of the oven after completion of the Self- Clean cycle. The door latch is automatically activatedteraf selecting the Self-Clean setting. Thelatch ensures that the door cannot be opened while the oven interioris at clean temperatures.

To start the Self-Clean cycle:

1.	Close the door completely.
2.	Turn the oven selector knob clockwiseot the self-clean mode.

Cleaning and Maintenance

Replacing Interior Halogen Oven Lights

CAUTION

DISCONNECT THE ELECTRIC POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BEFORE REPLACING BULB.

Do not touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.

glass light

cover

1. Unsnap glass light cover
using a screwdriver in the
access groove.	access
	groove

3. Turn the temperature control knob past the clean setting until

the knob stops. At this time, theclean indicator light will come

on. Within 30 seconds the automatic door latch engages and

the oven indicator light comes on. The ovenindicator light will

remain on until the oven reachestheself-clean temperature and

will then cycle on and off during the self-clean cycle. When the

oven reaches the elevated temperature needed for self-clean,

the door lock indicator light comes on.

4. The door lock indicator lightwill remain on until the self-clean is

completed or interruptedand the oven temperature drops to a

safe temperature. A complete cycle approximately 3 1/2 hours

with an additional 30 minutesneededfor the oven to cool down

enough for thedoor latch to disengage.NOTE: A fan noise will

be heard during the self-clean cycle and will continue to run for

the 3 1/2 hour duration of the self-cleancycle.

2.Firmly grasp light bulb and pull out.

3.Replace with halogen bulb using volt and wattage requirements listed on glass cover.

4.Replace the light cover by snapping glass cover onto metal box.

5.Reconnect power at the main fuse or circuit breaker.

light bulb

Product Care

5. When the cycle is completed, turn both the oven selector and

temperature control knob to the off position. When the oven

has completely cooled, open door and remove any ash from

the oven surfaces with a damp cloth.

To stop the Self-Clean cycle:

To cancel or interrupt the self-cleaning c ycle, t urn b oth th e temperature control knob and the oven function selector knob to OFF. When the oven temperature drops to a safe temperature, the automatic door latch will release and the oven door can be opened. When the oven has completely cooled, remove any ash from the oven surfaces with a damp sponge or cloth.

Power Failure

Do not attempt to us e d uring a power failure. Unit will not function.

Product Care