Assembly and operation of your Breville Wizz™ Electronic Mixer
Before first use
Before assembling your Breville Wizz™ Electronic Mixer, remove and safely discard any packaging material and promotional labels.
Ensure the Speed Control Dial is in the ‘OFF’ position and the appliance is switched off at the power outlet and the power cord is unplugged.
Wash the mixing bowls, beaters and dough hooks in warm, soapy water with a soft cloth. Rinse and dry thoroughly.
Mixing bowls may also be washed in the dishwasher.
When first using your Breville Wizz™ Electronic Mixer, you may notice and odour coming from the motor. This is normal and will dissipate with use.
Once the motor head is securely locked onto the mixer stand it can be tilted away from the bowl by pressing the tilt back locking button and lifting it back to a 45 degree angle.
Make sure the motor head is securely attached to the mixer stand before using. The mixer should not be used as a hand mixer. It must always be used on the stand.
Attach the revolving turntable
1.Attach the revolving turntable to the mixer stand by fitting the revolving turntable into the socket corresponding to the size of the bowl selected (Fig 2). The turntable should spin around freely.
Assembling the mixer
1.Place the mixer stand on a level, dry surface such as a bench top. Ensure the mixer stand is in the horizontal position.
2.Attach the motor head to the mixer stand by pressing and holding down the mixer release lever at the back of the mixer stand. Position the metal pin on the underside of the motor head to fit into the groove made when pressing down the mixer release lever [Fig 1). When the motor head is in position, release the lever.
Fig 2
Fig 1
7