Wolf ICBCT15G LT I P L E C O O K to P I N S TA L L AT I O N, T I O N a L S TA L L AT I O N S

I N S TA L L AT I O N I N S T RU C T I O N S

I N S TA L L AT I O N O P T I O N S

M U LT I P L E C O O K TO P I N S TA L L AT I O N

If the gas cooktop is to be used with any combination of additional cooktop units or modules with a filler strip, the cut-out width is calculated by adding the corresponding units' cut-out dimensions plus 32 mm for each addi- tional unit. Refer to the illustration below.

IMPORTANT NOTE: When multiple units are installed side by side, each unit must have its own separate recommended electrical circuit.

When two or more modules are installed together, an integrated module filler strip (IFILLER/S) is recommended. Contact your Wolf dealer for information on these accessory components.

1518 mm – FOUR MODULES WIDTH OR

1511 mm – 762 mm COOKTOP AND TWO MODULES OR

1276 mm – 914 mm COOKTOP AND ONE MODULE

1130 mm – THREE MODULES WIDTH OR 1124 mm – 762 mm COOKTOP AND ONE MODULE

743 mm

TWO MODULES WIDTH

	356 mm
		489 mm
64 mm	CUT-OUT	CUT-OUT
	WIDTH
		DEPTH
min

FRONT OF COUNTERTOP

Countertop cut-out dimensions for installation of multiple cooktops

O P T I O N A L

I N S TA L L AT I O N S

Dimensions will vary according to the specific installa- tion.

11