IMPORTANT NOTE
This installation must conform with local codes and ordinances.
WOLF GA S CO O K TO P S
GA S S U P P LY REQUIREMENTS
EXPLOSION HAZARD —
Securely tighten all external gas connections.
Failure to do so can result in explosion, fire or death.
IMPORTANT NOTE: The gas cooktop must be connected to a regulated gas supply.
IMPORTANT NOTE: This installation must conform with local codes and ordinances.
IMPORTANT NOTE: The natural gas cooktop is rated for elevations up to 2438 m without adjustment. Install a high altitude kit for eleva- tions from 2438 to 3084 m. The LP gas cooktop is rated for 3084 m.
The rating plate, located on the underside of the burner box, has information on the type of gas that should be used. If this information does not agree with the type of gas available, check with the local gas supplier.
Provide a gas supply line of 19 mm rigid pipe to the cooktop location. A smaller size pipe on long runs may result in insufficient gas supply. Pipe joint compounds, suitable for use with LP gas should be used. For LP gas, piping or tubing size can be 13 mm minimum. LP gas suppliers usually determine the size and mate- rials used on the system.
If local codes permit, a flexible metal appliance connector is recommended for connecting this cooktop to the gas supply line. Do not kink or damage the flexible connector when moving the cooktop. You will need to determine the fittings required, depending on the size of your gas supply line, flexible metal connector and
If rigid pipe is used as a gas supply line, a combination of pipe fittings must be used to obtain an
GA S RATING
Total Heat |
| Electrical |
|
| Types and |
| |
| Output | Gas | Rating | Appliance | Pressures |
| |
Model # | (Gas) | Units | (Watts) |
| Category | (mbar) | Country of Destination |
|
|
|
|
|
|
|
|
|
|
|
|
| I2H | G20 at 20 | AT, DK, EE, FI, GR, IE, IT, LT, |
|
|
|
|
| NO, PT, ES, SE, SI, SK, GB, CH | ||
ICBCT15G/S | 6.8 | kW | 230 |
|
|
| |
|
|
|
| ||||
| I2E | G20 at 20 | DE, PL | ||||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| I2E+ | G20 at 20/25 | BE, FR |
|
|
|
|
|
|
|
|
494 | g/h | 230 |
| I3P | G31 at 37 | BE, CZ, FR, GR, IE, NL, NO, PT, | |
| ES, GB, CH | ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| I2H | G20 at 20 | AT, DK, EE, FI, GR, IE, IT, LT, |
|
|
|
|
| NO, PT, ES, SE, SI, SK, GB, CH | ||
ICBCT30G/S | 14.7 | kW | 230 |
|
|
| |
|
|
|
| ||||
| I2E | G20 at 20 | DE, PL | ||||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| I2E+ | G20 at 20/25 | BE, FR |
|
|
|
|
|
|
|
|
1069 | g/h | 230 |
| I3P | G31 at 37 | BE, CZ, FR, GR, IE, NL, NO, PT, | |
| ES, GB, CH | ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| I2H | G20 at 20 | AT, DK, EE, FI, GR, IE, IT, LT, |
|
|
|
|
| NO, PT, ES, SE, SI, SK, GB, CH | ||
ICBCT36G/S | 17.7 | kW | 230 |
|
|
| |
|
|
|
| ||||
| I2E | G20 at 20 | DE, PL | ||||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| I2E+ | G20 at 20/25 | BE, FR |
|
|
|
|
|
|
|
|
1287 | g/h | 230 |
| I3P | G31 at 37 | BE, CZ, FR, GR, IE, NL, NO, PT, | |
| ES, GB, CH | ||||||
|
|
|
|
|
|
|
12