TROUBLESHOOTING
Problem | POSSIBLE CAUSES | WHAT TO DO |
|
|
|
Total brewing | The total brewing time |
|
time on LCD | displayed at the start of |
|
screen changes | the cycle is an estimate |
|
only and may change |
| |
different each time |
| |
| time depending on the |
|
| starting temperature |
|
| of the water in the |
|
| water tank. |
|
|
|
|
Brewing cycle | If using the gold tone |
|
finishes before | filter, this is normal. |
|
the ready signal | The total brewing time |
|
| displayed on the LCD |
|
| screen is calculated using |
|
| paper filters as coffee |
|
| passes through paper |
|
| filters slower. |
|
|
|
|
‘CLEAN COFFEE | Grinding burrs and | • Thoroughly clean the coffee |
CHUTE’ on LCD | coffee grinds chute | basket and gold tone filter |
screen | need to be cleaned. We | to ensure they are clear and |
| recommend doing this | unclogged of any coffee grinds. |
| immediately to avoid | • Check the bean hopper for any |
| clogging and overflowing | |
| of the coffee basket. | foreign body. |
|
| • Refer to ‘Cleaning the Grinding |
|
| Burrs and Coffee Grinds Chute’, |
|
| page 25. |
|
|
|
Machine beeps and | There is an issue with the | Remove the plug from the power |
displays ‘1’ on the | coffee grinds chute disc. | outlet. Wait 10 seconds then |
LCD screen |
| reinsert. Check the coffee grinds |
|
| chute disc for any |
|
| coffee grinds. This is the stainless |
|
| steel disc that is visible when the |
|
| |
|
| |
|
| can affect the performance of the |
|
| machine. Wipe the disc clean then |
|
| dry thoroughly. If the problem |
|
| persists, call Breville Consumer |
|
| Service. |
|
|
|
Machine beeps |
| Remove the plug from the power |
20 times in fast |
| outlet. Wait 10 seconds then |
succession and ‘2’ |
| reinsert. If the problem persists, call |
is displayed on the |
| Breville Consumer Service. |
LCD screen |
|
|
|
|
|
34 |
| 35 |
|
|
|