Breville BDC550XL manual Using the Youbrew Glass Carafe Mode

Page 8

USING THE YOUBREW® Glass - CARAFE MODE

USING THE YOUBREW® GLASS - CARAFE MODE

b)Paper filter (8-12 cup, flat base basket style with ~ 3¼"/8.25cm base). Ensure that the paper filter is completely open and touching the side walls and bottom of the coffee basket.

Close the coffee basket lid. Press the OPEN button to open the swing-out door. Attach the coffee basket to the swing-out door by ensuring the hinge area of the coffee basket is firmly seated in its most downward position on the two door hooks. Close the door until it clicks shut.

CLICK

NOTE

The safety interlock system will prevent operation if the coffee basket is not in place, if it is not firmly seated on the two door hooks, or if the swing-out door is not closed. The LCD screen will flash ‘EMPTY COFFEE FILTER’ until the issues are resolved.

complete, discard the water from the carafe and repeat the cycle again for best results. The machine is now ready to use.

CAUTION

We recommend using cold, filtered water. We do not recommend the use of de-mineralized or distilled water as this may affect the taste of brewed coffee and how the coffee machine is designed to function.

1. Fill the Water Tank

Press to open the flip-top lid. Pour the desired amount of cold, preferably filtered water into the tank using a jug or the provided carafe. The LCD screen will indicate the amount of water in the tank as it is filled. This amount will be brewed. The machine will beep when full and the water level float will rise to indicate the maximum level. Do not exceed the 12 cup maximum. Doing so may cause the carafe to overflow or water spillage at the back of the machine. Close the flip-top lid.

NOTE

Check the water level on the LCD screen before use. The water tank should be refilled with cold, preferably filtered water. Do not fill with any other liquid.

NOTE

Never fill the water tank once the coffee machine has started a brewing cycle. This will affect the volume dispensed into the carafe.

2. Pre-Warm the Carafe

A warm carafe will help maintain the coffee’s optimal temperature and keep coffee hotter for longer. Press the lid release button to open the carafe lid. Fill the carafe with hot tap water for about 30 seconds then discard the water. Ensure the carafe is completely empty and the lid is completely closed before placing the carafe under the drip stop outlet. Starting a brew cycle with water or coffee in the carafe will cause the carafe to over flow.

3. Select ‘Carafe’ Mode

Press the CARAFE button. The LCD screen will display a carafe symbol and the number of cups that will be brewed (the amount of water in the tank). Each cup is approximately 5 fl.oz.

4.Select the Brew Strength or ‘PRE-GROUND’ Coffee Setting

Press the STRENGTH button. The LCD screen will flash the current strength setting and the and buttons will illuminate and flash. Use these buttons to cycle through 7 strength settings from ‘MILD’, ‘STRONG’

NOTE

If using pre-ground coffee, select the ‘PRE-GROUND’ coffee setting. This will disable the burr grinder. Add pre- ground coffee to the gold tone filter or a paper filter (8-12 cup, flat base basket style with ~ 3¼"/8.25cm base). We recommend 1 level tablespoon of pre-ground coffee per 5oz/150ml cup of water. Adjust the amount according to your individual taste. The maximum capacity for pre-ground coffee is

16 level tablespoons. Exceeding this amount may cause overflow.

When using the machine for the first time, we recommend selecting the ‘PRE-GROUND’ coffee setting, however omitting the addition of pre-ground coffee. This will flush the machine and remove any dust particles or residues from the manufacturing process.

5. Start the Brew Cycle

Press the START CANCEL button. The grinder will commence grinding the correct amount of coffee for the selected brew size and strength. If the ‘PRE-GROUND’ coffee setting has been selected, the grinder will be disabled.

NOTE

Steam may emit from the rear steam vent during grinding and brewing.

USING THE YOUBREW® Glass

- CARAFE MODE

First Time Use Only

We recommend flushing the machine to remove any dust particles or residues from the manufacturing process. Follow the proceeding instructions, ensuring to completely fill the water tank (Step 1) and select the ‘PRE-GROUND’ coffee setting (Step 4). However do not add any coffee to the coffee basket. Once the cycle is

NOTE

Never pour water into the bean hopper or grinding chamber area. Doing so can cause the grinder to clog. Only re-commence use when the grinding chamber and grinding burrs are completely dry. Refer to Troubleshooting, ‘Moisture clogging grinder’, page 29.

to ‘INTENSE’ or for the ‘PRE-GROUND’ coffee setting.

Press the STRENGTH button to select. The LCD screen will cease to flash once selected.

NOTE

The Flavor setting is only available in 'Single Cup' mode.

This is normal.

The count-down timer will then begin. The time displayed is an estimate only and will depend on the amount and strength settings you have selected.

The LCD screen will display:

a)‘PRE-HEATING’ as the water is heated to the optimal temperature. The pre-heating time will depend on the starting temperature of the water in the water tank.

14

 

15

 

 

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Breville Consumer Service Center BDC550XLCongratulations Register online for product support Exclusive offersImportant safeguards For Household USE only Save These Instructions Know Your Breville productStart Cancel button Power buttonOpen button Single CUP buttonBefore First USE OperatingBefore First USE Using the Youbrew Glass Carafe Mode Carafe ModeSingle CUP Mode Using the Brew Pause FeatureEmpty the Coffee Basket Warming PlateSelect ‘Single Cup’ Mode Select the Flavor SettingChanging the ‘READY’ Signal Volume Changing the ‘READY’ Signal VolumeProgramming the Clock Optional Programming AUTO-START OptionalHelpful Tips Helpful TipsCare & Cleaning Care & CleaningDe-Scale the Machine Rinse the MachineTroubleshooting TroubleshootingPossible Causes What to do ‘LOCK Bean ‘EMPTY CoffeePossible Causes What to do Regularly switch Machine takes aLong time to brew Machine uses a lot‘CLEAN Coffee Félicitations Table DES MatièresBreville Vous Recommande LA Sécurité Avant Tout Importantes Mesures DE SécuritéUsage Domestique Seulement Conservez CES Instructions Faites LA Connaissance DE Votre Produit Breville Faites LAConnaissance Touche Start Cancel Touche PowerTouche Single CUP Touche CarafeFonctionnement Avant LA Première UtilisationAvant LA Première Utilisation Préparation InitialeUtilisation DE LA Youbrew Glass Mode Carafe Utilisation DE LAUtilisation DE LA Youbrew Glass Mode Tasse Utilisation DE LA Youbrew Mode TasseDébutez le cycle d’infusion Sélectionner le mode Tasse Single CupSélectionner le réglage de saveur Programmation DU Démarrage Automatique Optionnel Programmation DU Démarrage Automatique OptionnelProgrammation DE L’HORLOGE Optionnel Changer LE Volume DU Signal ‘READY’ Fort BAS SourdineTrucs Utiles Trucs UtilesEntretien Nettoyage Entretien & NettoyageNettoyer LE RAMASSE-GRAINS ET LE Plateau D’ÉGOUTTEMENT Nettoyer LE BoîtierEnlever LES Dépôts Calcaires Détartrer la machineGuide DE Dépannage Guide DE DépannageProblème Causes Possibles QUE Faire ‘LOCK Bean ‘FILL TANK’Problème Causes Possibles QUE Faire ‘FLAVOR’La machine prend Du temps à infuserLa machine utilise Beaucoup de café‘DE-SCALE’
Top Page Image Contents