To Use Pasta Press Accessory
4.Use the
To Loosen the Pasta Ring:
1.If pasta ring is too tight to remove by hand, slip the wrench over the grooves.
2.Turn pasta ring in direction indicated by the arrow to OPEN.
ENGLISH
|
|
| E |
|
| S | |
| LO |
| |
OPEN | C |
|
|
|
|
|
5.Separate pasta as described in “Pasta Plates“ section.
To Change the Pasta Plates:
1.Turn stand mixer speed control to OFF.
2.Unplug the stand mixer.
3.Remove the pasta press accessory from the stand mixer.
4.Remove the cutter, pasta ring, auger and clean the dough out of the press housing.
5.Then reassemble the accessory as stated in “To Assemble Pasta Press Accessory“ section.
NOTE: Do not use wrench to attach ring to press housing. Damage to the accessory may result.
7