6.Touch OK to return to the Settings Menu.
NOTE: It is normal to hear sounds during steam cooking cycles related to the opening and closing of the water inlet valve and water flowing into the steam system.
LearnMode
The oven has a learn mode which can show you the oven functions and allow you to become comfortable with the controls. When in the learn mode, the oven does not actually turn on and will not warm food.
To Use Learn Mode:
1.From the Main menu, touch MORE.
2.Touch SETTINGS.
3.Touch LEARN MODE.
4.The Learn Mode Main Menu will be displayed.
SabbathMode
The Sabbath Mode sets the oven(s) to remain on in a bake setting until turned off. A timed Sabbath Mode can also be set to keep the oven on for only part of the Sabbath.
When the Sabbath Mode is set, only the number and start keys will function, no tones will sound, and the displays will not show messages or temperature changes. The heat sources icons will appear lit on the oven display throughout the Sabbath Mode.
When the oven door is opened or closed, the oven light will not turn on or off and the heating elements will not turn on or off immediately.
If a power failure occurs when the Sabbath Mode is set, the oven(s) will remain in Sabbath Mode but will no longer be actively cooking. The “ON” indicator will no longer be lit. Touch OFF to return to normal operating mode
WARNING
Burn Hazard
Use an oven mitt to remove temperature probe. Do not touch broil element.
Failure to follow these instructions can result in burns.
NOTE: If you touch Sabbath Mode while the temperature probe is set, a message will appear saying “Probe not available”. Remove the probe and touch Continue to enter the untimed Sabbath Mode. Touching Cancel returns you to the Bake mode.
To Enable:
Before the Sabbath Mode can be regularly set, the oven(s) must first be enabled with a one time only setup. On double oven models, each oven will need to be enabled independently.
1.From the Main menu, touch MORE.
2.Touch SETTINGS. Touch MORE.
3.Touch SABBATH MODE.
4.Touch Enable Sabbath Mode option when baking.
5.Touch OK.
To Disable:
The oven(s) can be disabled of the ability to set the Sabbath Mode by repeating the previous steps. See the “To Enable” section. When disabled “SABBATH DISABLED” will appear on the display and remain on for approximately 5 seconds.
The Sabbath Mode cannot be regularly set until
To Set Regularly Untimed:
Sabbath Mode must be enabled before starting the Bake cycle. See the “To Enable” section.
On double oven models only, each oven can be set independently.
1.From the Main menu, touch BAKE.
2.To change the preset temperature, enter the desired temperature using the numerical keys. The temperature can be set between 170°F and 500°F (77°C and 260°C).
3.Do not enter a cook time.
4.When settings are correct, touch START.
5.If the oven temperature is below the set temperature, the Preheat Bar will be displayed showing the status of the preheat cycle. When preheat is complete a tone will sound.
6.Once in the Bake cycle, a Sabbath Mode key will appear in the lower right hand corner of the display.
7.Touch SABBATH MODE. (If Sabbath Mode does not appear in the Bake cycle, refer to the “To Enable” section.)
8.Once in the Sabbath Mode, an End Sabbath key will appear in the lower right hand section of the display. Touch and hold the End Sabbath Mode to return to the regular Bake mode.
9.Touch Upper Oven OFF, Lower Oven OFF or OFF at anytime to turn the oven off.
To Regularly Set Timed:
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
Sabbath Mode must be enabled before starting the Bake cycle. See the “To Enable” section.
On double oven models only, each oven can be set independently.
1.From the Main menu, touch BAKE.
2.To change the preset temperature, enter the desired temperature using the numerical keys. The temperature can be set between 170°F and 500°F (77°C and 260°C).
3.To enter a cook time, touch COOK TIME. Enter the desired cook time using the numerical keys.
4.Once a cooking setup function is complete, the Start key will light up.
5.When settings are correct, touch START.
6.If the oven temperature is below the set temperature, the Preheat Bar will be displayed showing the status of the preheat cycle. When preheat is complete a tone will sound.
9