KitchenAid W10379133A manual Backer Panels, Dispenser Frame dispenser models only

Backer Panels

NOTES:

■Dashed lines represent placement of backer panels on overlay panels.

■Illustration shows backer panels placed on decorative overlays.

Dispenser Frame (dispenser models only)

The dispenser frame attaches to the panel with 4 screws.

To remove the dispenser frame:

1.Remove the four screws attaching the frame.

2.Pull the dispenser frame from the decorative panel.

3.To replace the frame, hold the frame to the panel and replace the screws.

6³⁄₁₆"

(15.7 cm)

Top Offset 1⁵⁄₈" (4.13 cm)

22"

(55.9 cm)

A

C

Bottom Offset ¹⁄₂" (1.27 cm)

Handle-

Side Offset

¹⁄₄"

(6.4 mm)

Side Offset

¹⁄₂" (12.7 mm)

A

B

C

70¹⁄₂"

(179.1 cm)

33¹⁄₄"

(84.5 cm)

A A

Bottom Offset ¹⁄₈" (3.2 mm)

70¹⁄₂"

(179.1 cm)

B

Bottom Offset ¹⁄₈" (3.2 mm)

A. Decorative panel

B. Refrigerator door

C. Dispenser frame

The dispenser frame overlaps the dispenser cutout by ⁵⁄₁₆"

(0.78 cm) on each side and ¹⁄₂" (1.27 cm) on the top and bottom.

Model	D	E	F
36	14¹/₄" (36.20 cm)	19¹/₄" (48.90 cm)	33³/₄" (85.73 cm)
42	16³/₄" (42.55 cm)	22³/₄" (57.79 cm)	39³/₄" (100.97 cm)
48	19¹/₄" (48.90 cm)	26¹/₄" (66.68 cm)	45³/₄" (116.21 cm)

AA

A. ¹⁄₂" (1.27 cm) Overlap

14