KitchenAid KSSC36FTS Plug in Refrigerator, Move Refrigerator to Final Location, Parts Supplied

Page 22

Connect to Refrigerator

 

Parts Supplied:

 

■ ¹⁄₄" to ¹⁄₄" (6.35 mm to 6.35 mm) male-to-male coupling

6"

6"

(15.2 cm)

(15.2 cm)

 

1"

7"

(2.54 cm)

 

(17.78 cm)

 

Plug in Refrigerator

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Set control switch at top of cabinet to the OFF position.

2.Plug into a grounded 3 prong outlet.

NOTE: The flexible, codes approved water supply line should connect to the supply valve through the floor.

1.Unplug the refrigerator or disconnect power.

2.Connect the 7 ft (2.13 m) flexible codes approved water tube to the water supply valve.

3.Flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear.

4.Tape the 7 ft (2.13 m) flexible codes approved water supply line to the floor, 7" (17.78 cm) from the left side of the refrigerator. Tape along the length of the tubing, which will allow it to pass beneath the refrigerator without interference.

NOTE: Allow a minimum of 26" (66.04 cm) of flexible codes approved water supply line to be loose at the front of the refrigerator for connecting to the refrigerator.

5.Connect the 7 ft (2.13 m) flexible codes approved water supply line to the refrigerator.

NOTE: If the main water shutoff valve is behind the refrigerator, a secondary water shutoff valve may be installed in line with the water supply line at the front of the product.

C D

B

A

E F G

A. Household water line

E. Bulb

B. Nut (purchased)

F. Nut

C. Ferrule (purchased)

G. Refrigerator water tubing

D.Coupling

6.Turn on the water supply valve and check all connections for leaks.

22

Move Refrigerator to Final Location

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT: To avoid floor damage, make sure levelers are raised (not touching floor) and refrigerator is on rollers before moving.

1.Place top of cardboard carton or plywood under refrigerator. Remove dolly.

2.Do not remove film or cover.

3.Move the refrigerator straight back and evenly into the opening. Be sure that the refrigerator side trims are not interfering with the door opening. Also, be sure that the water tubing is not kinked and the power supply cord is on top of the refrigerator.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Table of Contents/Índice/Table des matières Side by Side BUILT-IN RefrigeratorÍndice Table of ContentsTable DES Matières Refrigerator Safety Your safety and the safety of others are very importantArchitect Series ModelsSide by Side Non-Dispensing Refrigerators Classic SeriesSide by Side Dispensing Refrigerators Complete SeriesTools and Parts Installation RequirementsLocation Requirements Electrical Requirements Recommended Grounding MethodWater Supply Requirements Tipping RadiusTop View Product DimensionsSide View Front View Model42 106.7 cm Models Door Swing Dimensions36 91.4 cm Models 48 121.9 cm ModelsDoor Overlay Series Door Panel and CabinetryClearanceHinge Decorative Overlay Panel Overlay Series Custom Panels and Handle KitsModel a Model D Backer PanelsDispenser Frame dispenser models only Dispenser frame attaches to the panel with 4 screwsClassic Series Factory Panels and Kits Door Panels for Non-dispenser Models Classic Series Custom PanelsTop Grille Panel Dispenser Frame Classic series dispenser models Door Panels for Dispenser ModelsTo remove the dispenser frame Classic, Architect and Complete Series Custom Side Panels Overlay Series Custom Side PanelsUnpack the Refrigerator Installation InstructionsMeasure the distance from point a as shown to back wall Reduce Tipping Radius Install Anti-Tip BoardsTo Install Anti-tip Boards Move the Refrigerator into HouseStyle 1-Shutoff Valve Connection Connect the Water SupplyConnect to Water Line Parts Needed Style 2-Copper Line ConnectionParts Supplied Plug in RefrigeratorMove Refrigerator to Final Location Connect to RefrigeratorLevel and Align Refrigerator Install Classic Series Custom PanelsDoor Panels Door Panel Installation Install Overlay Series Custom PanelsCheck refrigerator level and adjustment. Adjust if needed Door Swing Adjustment Adjust DoorsDoor Height Adjustment Classic and Architect ModelsInstall Base Grille Install Side PanelDoor-to-Door or Door-to-Refrigerator Trim Adjustment Style 1 Dispenser Models Complete InstallationWater System Preparation Style 2 Non-Dispenser ModelsSeguridad DEL Refrigerador Su seguridad y la seguridad de los demás es muy importanteSerie Architect ModelosRefrigeradores de dos puertas sin despachador Serie ClassicRefrigeradores de dos puertas con despachador Serie CompleteRequisitos de ubicación Requisitos DE InstalaciónPiezas y herramientas Medidas de la aberturaMétodo de conexión a tierra recomendado Requisitos del suministro de agua Arco de vuelcoMedidas del producto Modelos de 36 91,4 cm Modelos de 42 106,7 cm Medidas de oscilación de las puertasModelos de 48 121,9 cm Panel Oscilación de Panel decorativo recubierto Modelo aModelo D Paneles de soporteMarco del despachador Solamente en modelos con despachador El marco del despachador se sujeta al panel con 4 tornillosPaneles y juegos de fábrica de la serie Classic Panel de la rejilla superior Panelesa la medida para la serie ClassicPaneles de puerta para modelos sin despachador ModeloPaneles de puerta para modelos con despachador Refrigerador Medidas para la instalación empotradaMedidas del refrigerador y del adorno lateral Adorno lateralRecubierto Cómo reducir el arco de vuelco Instrucciones DE InstalaciónDesempaque el refrigerador Cómo hacer entrar el refrigerador en la casaCómo instalar los tableros antivuelco Cómo instalar los tableros antivuelcoConexión del suministro de agua Conexión a la línea de agua Piezas necesariasPiezas suministradas Estilo 2-Conexión de la tubería de cobreConexión al refrigerador Cm a 3,18 cm cercana al refrigeradorCómo mover el refrigerador a su ubicación Final Cómo enchufar el refrigeradorNivelación y alineamiento del refrigerador Cómo instalar los paneles a la medida Para la serie Classic Paneles de la puertaSerie de paneles recubiertos Instalación del panel de la puertaCómo ajustar la oscilación de las puertas Ajuste las puertasCómo ajustar la altura de la puerta Modelos Classic y ArchitectCómo instalar el panel lateral Cómo instalar la rejilla de la baseEstilo 1-Modelos con despachador Cómo terminar la instalaciónPreparación del sistema de agua Estilo 2-Modelos sin despachadorSécurité DU Réfrigérateur Votre sécurité et celle des autres est très importanteSérie Architect ModèlesRéfrigérateurs côte à côte sans distributeur Série ClassicRéfrigérateurs côte à côte avec distributeur Série ComplèteDimensions de l’ouverture Exigences D’INSTALLATIONExigences d’emplacement Outillage et piècesMéthode recommandée de mise à la terre Spécifications de l’alimentation en eau Rayon de basculementVue de dessus Dimensions du produitVue latérale Vue avant ModèleModèles de 36 91,4 cm Modèles de 42 106,7 cm Dimensions pour louverture des portesModèles de 48 121,9 cm Porte Porte Panneau décoratif de la série Panneaux décoratifs Modèle aModèle D Panneaux dappuiPour retirer le cadre du distributeur Ensembles de panneaux dorigine de la série Classic Panneau de la grille supérieure Panneaux personnalisés de la série ClassicPanneaux de porte pour modèles sans distributeur 34 ¹⁄₄ 87,0 cmPour retirer le cadre du distributeur Panneaux de porte pour modèles avec distributeurLe cadre du distributeur se fixe au panneau avec 4 vis Dimensions pour un panneau en affleurement Dimensions du réfrigérateur et des garnitures latéralesRéfrigérateur Dimensions pour un panneau inséré Dimensions pour un panneau inséré en retraitDéballage du réfrigérateur Instructions ’INSTALLATIONRéfrigérateur Modèle Rayon de basculement réduit Réduction du rayon de basculementFaire entrer le réfrigérateur dans le domicile Saisir les deux extrémités de la grille supérieureInstallation de planches antibasculement Raccordement à l’alimentation en eau25 cm à 3,18 cm à proximité du réfrigérateur Raccordement au réfrigérateurPièces fournies Vérifier qu’il s’agit d’une canalisation d’eau froideBranchement du réfrigérateur Déplacementdu réfrigérateur à Lemplacement finalRéglage de laplomb et alignement du Réfrigérateur Installation des panneaux personnalisés De la série Classic Panneaux de porteInstallation des panneaux de porte Ajustement de louverture des portes Ajustement desportesAjustement de la hauteur des portes Modèles Classic et ArchitectInstallation de la grille de la base Installation du panneau latéralEmboîter la plinthe sur la grille de la base Style 1 Modèles avec distributeur Achever l’installationPréparation du système d’eau Style 2 Modèles sans distributeurW10555563A

KSSC36FTS, KSSC42FTS, KSSC48FTS specifications

The KitchenAid KSSC48FTS, KSSC42FTS, and KSSC36FTS are premium built-in side-by-side refrigerators designed for modern kitchens. These models not only provide ample storage but also incorporate advanced technologies and distinctive features that cater to culinary enthusiasts and everyday users alike.

The KitchenAid KSSC48FTS is the largest of the trio, offering an impressive 48-inch width and a generous capacity that provides ample space for fresh and frozen foods. It features a sleek stainless steel exterior with a commercial-inspired design that brings a professional touch to any kitchen. One standout characteristic is its ExtendFresh Temperature Management System, which utilizes sophisticated sensors and a dual cooling system to maintain optimal temperatures in both the refrigerator and freezer compartments. This helps preserve the freshness of perishable foods longer.

The KSSC42FTS, with a 42-inch width, retains many of the premium features found in its larger counterpart while providing slightly less capacity. It also includes the ExtendFresh system and is equipped with a FreshChill Temperature-Controlled Drawer that offers adjustable temperature settings, perfect for storing delicate items like wines and cheeses. Additional features include a water filtration system that reduces contaminants, ensuring that every glass of water is pure and refreshing.

At the heart of the KitchenAid KSSC36FTS is its 36-inch design, tailored for kitchens where space is a concern without compromising performance and style. Like the other models, it features the ExtendFresh system, along with an innovative Preserva Food Care System that helps to manage humidity levels in the refrigerator, preventing food spoilage. Each model boasts adjustable spill-resistant shelves, enhancing organization and making cleanup easier.

In terms of usability, all three models come equipped with interior LED lighting, providing bright illumination to help you easily find what you need. The appliances also feature a user-friendly control panel that allows for precise temperature adjustments and settings.

The KitchenAid KSSC series is built not just for function but also for performance and convenience, providing users with a perfect blend of style, technology, and capacity. Whether you opt for the KSSC48FTS, KSSC42FTS, or KSSC36FTS, you’ll enjoy a premium refrigeration experience tailored to meet your kitchen needs.
Top Page Image Contents