KitchenAid KHMC107E warranty To set light to be on for a specific time

Getting to Know Your Microwave-Convection Hood Combination

To set light to be on for a specific time:

1. Turn on light. TOUCH

LIGHT

ON•NIGHT•OFF

(once for high, twice for low)

2. Choose timer.

NOTE: If both the fan and light are operating and the TIMER SET • START Pad is touched twice, both the fan and light will be controlled by the timer. The Display will alternate between “FAN” and “LIGHT” one time before “STOP” is displayed.

TOUCH	YOU SEE
TIMER	ENTER						DELAY
	SENSOR						OZ
SET•START	PREHEAT
	WEIGHT						LBS
							COOK
	AUTO	COOK	DEFR	TEMP	CONV		2 3 4
	ROAST	PWR	QTY	PROBE	COMB	START?	TIMER
TIMER	ENTER						DELAY
	SENSOR						OZ
SET•START	PREHEAT
							COOK
	WEIGHT						LBS
	AUTO	COOK	DEFR	TEMP	CONV		2 3 4
(twice within	ROAST	PWR	QTY	PROBE	COMB	START?	TIME

3 seconds)

3. Set stop time.	TOUCH	YOU SEE
Example to turn off light at 2 o’clock,	2	ENTER	DELAY
when time of day is 12 o’clock:		SENSOR	LBS
		WEIGHT
		PREHEAT	OZ
			COOK

NOTE: You can set the time up to the	0
next 12 hours.

0

AUTO	COOK	DEFR	TEMP	CONV	2 3 4
ROAST	PWR	QTY	PROBE	COMB	START? TIMER

4. Start timer.

TOUCH	YOU SEE
	ENTER				DELAY
START	SENSOR				LBS
	WEIGHT
	PREHEAT				OZ
					COOK
	AUTO	COOK DEFR	TEMP	CONV	2 3 4
	ROAST	PWR QTY	PROBE	COMB START?

	OR
At end of time, the current time of day	TIMER
will show and no tones will sound.	SET•START

To check the stop time:	TOUCH
The set time will be displayed for 3 seconds.	TIMER
	SET•START

To cancel timer:

NOTE: Canceling the timer will cause the light to shut off; however, canceling the light will not cancel the timer.

TOUCH

TIMER

CANCEL

16