KitchenAid W10206423A manual Electrical Requirements, Water Supply Requirements, Leveling

Page 5

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your ice maker into its final location, it is important to make sure you have the proper electrical connection:

A 115 Volt, 60 Hz., AC only, 15- or 20-amp electrical supply, properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required.

It is recommended that a separate circuit, serving only your ice maker, be provided. Use a receptacle which cannot be turned off by a switch or pull chain.

IMPORTANT: If this product is connected to a GFCI (Ground Fault Circuit Interrupter) equipped outlet, nuisance tripping of the power supply may occur, resulting in loss of cooling. Ice quality may be affected. If nuisance tripping has occurred, and if the condition of the ice appears poor, dispose of it.

Recommended grounding method

The ice maker must be grounded. The ice maker is equipped with a power supply cord having a 3 prong grounding plug. The cord must be plugged into a mating, 3 prong, grounding-type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility of the customer to have a properly grounded, 3 prong wall receptacle installed by a qualified electrician.

Water Supply Requirements

A cold water supply with water pressure of between 30 and

120 psi (207 and 827 kPa) is required to operate the ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT:

Reverse osmosis water filtration systems can be used only with ice maker installations that have a gravity drain. A reverse osmosis system is not recommended for ice makers that have a drain pump installed.

The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the ice maker needs to be between 30 and 120 psi (207 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

NOTE: The reverse osmosis system must provide 1 gal. (3.8 L) of water per hour to the ice maker for proper ice maker operation. If a reverse osmosis system is desired, only a whole-house capacity reverse osmosis system, capable of maintaining the steady water supply required by the ice maker, is recommended. Faucet capacity reverse osmosis systems are not able to maintain the steady water supply required by the ice maker.

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If you have questions about your water pressure, call a licensed, qualified plumber.

Leveling

It is important for the ice maker to be level in order to work properly. Depending upon where you install the ice maker, you may need to make several adjustments to level it. You may also use the leveling legs to lower the height of the ice maker for undercounter installations.

Tools needed:

Gather the required tools and parts before starting installation.

9" level

Adjustable wrench

NOTE: It is easier to adjust the leveling legs if you have another person to assist you.

1.Move the ice maker to its final location.

NOTE: If this is a built-in installation, move the ice maker as close as possible to the final location.

2.Place the level on top of the product to see if the ice maker is level from front to back and side to side.

3.Push up on the top front of the ice maker, and then locate the leveling screws that are on the bottom front of the ice maker.

4.Using an adjustable wrench, change the height of the legs as follows:

Turn the leveling leg to the right to lower that side of the ice maker.

Turn the leveling leg to the left to raise that side of the ice maker.

NOTE: The ice maker should not wobble. Use shims to add stability when needed.

5.Push up on the top rear of the ice maker and locate the leveling legs that are on the bottom rear of the ice maker.

6.Follow the instructions in Step 4 to change the height of the legs.

7.Use the level to recheck the ice maker to see that it is even from front to back and side to side. If the ice maker is not level, repeat steps 2 to 5. If the ice maker is level, go to the “Connect Water Supply” section.

5

Image 5
Contents ICE Maker Table DES Matières Table of ContentsYour safety and the safety of others are very important ICE Maker SafetyCleaning Before Use Installation InstructionsUnpack the Ice Maker Location RequirementsWater Supply Requirements Electrical RequirementsLeveling Recommended grounding methodRear View Connecting the Water LineConnect Water Supply Drain Connection Connecting the DrainIce Maker Door Gravity Drain SystemReverse Hinges Remove DoorReplace Door Top HingeNormal Sounds ICE Maker USEHow Your Ice Maker Works Ice Making ProcessICE Maker Care CleaningUsing the Controls Dirty or clogged condenser CondenserInterior Components To shut down the ice maker For ice makers with a drain pump installedVacation and Moving Care Ice Production TroubleshootingIce Maker Operation Plumbing Problems Assistance or ServiceIce Quality U.S.ALimited Warranty Kitchenaid ICE Maker WarrantyItems Excluded from Warranty This limited warranty does not coverVotre sécurité et celle des autres est très importante Sécurité DE LA Machine À GlaçonsExigences demplacement Instructions D’INSTALLATIONDéballage de la machine à glaçons Enlèvement des matériaux d’emballageSpécifications électriques Méthode de mise à la terre recommandéeSpécifications de l’alimentation en eau Alimentation en eau par osmose inverseRaccordement à la canalisation d’eau NivellementRaccordement du tuyau d’eau Outillage nécessaireVUE Arrière Raccordement au drain de vidangeVidange par gravité Système avec pompe de vidange sur certains modèles Porte de la machine à glaçonsRaccordement du drain de vidange Dépose de la porteInversion des charnières Réinstallation de la porteCharnière supérieure Charnière inférieureSons normaux Utilisation DE LA Machine À GlaçonsFonctionnement de la machine à glaçons Fabrication de la glaceNettoyage Utilisation des commandesEntretien DE LA Machine À Glaçons Un condenseur sale ou obstrué CondenseurComposants intérieurs Machine à glaçons avec pompe de vidange Précautions à prendre avant les vacances Ou un déménagementArrêt de la machine à glaçons Production de glaçons DépannageLa machine à glaçons ne fonctionne pas La machine à glaçons semble bruyanteProblèmes de plomberie Qualité des glaçonsLa grille ne découpe pas les plaques de glace Goût, odeur ou couleur grise des glaçonsSi vous avez besoin de pièces de rechange Assistance OU ServicePour plus d’assistance Nos consultants fournissent l’assistance pourGarantie Limitée Garantie DE LA Machine À Glaçons KitchenaidÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasAll rights reserved W10206423A

W10206423A specifications

The KitchenAid W10206423A is a highly versatile and efficient appliance that enhances the culinary experience in any modern kitchen. Designed with attention to detail, this kitchen tool boasts several features and technologies that make it a must-have for both amateur cooks and professional chefs alike.

One of the standout features of the KitchenAid W10206423A is its powerful motor, which provides superior mixing capabilities. With an impressive wattage, the motor ensures consistent results whether you are whipping, kneading, or blending ingredients. This heavy-duty performance means you can tackle even the most demanding recipes with ease, making it an indispensable ally for baking, cooking, or food preparation tasks.

Equipped with a range of speed settings, the Kitchenaid W10206423A allows for personalized control over mixing techniques. From slow stirring for gentle ingredients to high-speed whipping for airy mixtures, the adjustable speeds provide the flexibility needed for a variety of recipes. This feature also minimizes splatter and promotes thorough ingredient incorporation, ensuring that your dishes yield professional-quality results.

Another characteristic that sets the KitchenAid W10206423A apart is its robust construction. Crafted from durable materials, this kitchen appliance is built to withstand the rigors of daily use. The design not only contributes to its longevity but also makes it easy to clean after use, enhancing your overall kitchen experience. The sleek design fits seamlessly in any kitchen décor, combining practicality with style.

Additionally, the KitchenAid W10206423A comes with a selection of attachments that broaden its functionality. From dough hooks to whisk attachments, these tools enable users to expand their culinary repertoire. Whether you're making bread, whipping cream, or mixing cake batter, the versatility of attachment options allows the appliance to adapt to various cooking needs.

In terms of safety, the KitchenAid W10206423A incorporates built-in features that ensure safe operation. The appliance is designed with a secure locking mechanism to prevent accidental start-ups, giving users peace of mind while they work.

In summary, the KitchenAid W10206423A is a powerful and adaptable kitchen appliance that caters to the needs of a diverse range of cooking tasks. With its robust motor, adjustable speed settings, durable construction, and versatility provided by various attachments, this model stands as an excellent investment for anyone looking to elevate their culinary skills. Whether you are a seasoned cook or just beginning your culinary journey, the KitchenAid W10206423A is sure to become an essential tool in your kitchen.