501974402003_UK 8-10-2007 13:47 Pagina 10
Building-in
1 | 2 |
16
Lean the bars to the surface of the furniture. Fix the bars with the screws provided; then completely extract the two bars.
In case of installation above a "warmer drawer", use the top of the latter as a reference for the coffee maker runners. In this case, there will be no support surface.
Put the appliance on its housing and fasten it with the screws.
3 | 1 | 4 | 10 |
|
|
Fix the power cord with the special clip, to avoid the cord entangling when extracting or inserting the appliance. The power cord must be long enough to allow the extraction of the appliance for refilling the coffee bean container.
Regulations require that the appliance must be earthed. The electrical connection must be made by a qualified electrician in compliance with the manufacturer’s instructions and applicable local regulations.
To align the appliance correctly, put the spacers under the bar’s support.
10