Start Time, AUTO-START no, Descale | KitchenAid KSCX 3610 manual

501974402003_UK 8-10-2007 13:48 Pagina 20

The following menu parameters and functions can be changed by the user:

•Clock

•Auto-start time

•Descaling process

•Coffee temperature

•Length of time the appliance remains on

•Water hardness Factory default values

To set the clock, proceed as follows:

• Press the	(the light over the button comes on) then press the	button repeatedly until the
appliance displays

•Press the button to set the clock. (If you hold the , button down, the time is changed rapidly).

•Press the button to confirm the value;

• Press the

button to exit programming mode or

to change other parameters.

When the appliance is in stand-by, you can see the hour by pressing any one of the buttons (except the ON/OFF button).

This enables you to set automatic start times.

• Make sure the clock on the appliance is set as described above.

• Press the

button then press the

button repeatedly until the appliance displays:

START TIME 00:00

•Press the button to set the auto-start time. (If you hold the , button down, the time is changed rapidly).

•Press the button to confirm the value,

•Press once and the appliance displays the message:

Press the button to modify the function (the appliance displays AUTO-START YES);

• Press the button to activate auto-start;

• Press the

button to exit programming mode or the

button to change other parameters.

Over time, the continuous heating up of the water used to make the coffee leads to lime scale building up in the inner circuits of the appliance.

When the appliance displays the message:

you should perform the descale cycle. Proceed as follows:

• make sure the appliance is ready.

• press the	button (the light over the button comes on) then press the	button repeatedly
until the appliance displays:

• Press and the appliance displays the message:

• Press the button to start the descale programme.