KitchenAid KSCX 3610 manual Building-in

Page 9

501974402003_UK 8-10-2007 13:47 Pagina 9

Building-in

Please check the minimum measures (mm) necessary to the proper installation of the appliance.

The coffee maker must be installed in a column unit, which must in turn be securely fixed to the wall with standard brackets.

Fasten metal strip using the two screws.

20

455

595

527

560

368	80
	80
	Min.
361
74

. Min 80

450			ventilation passageway
			.
			Min
	550		50
	550	.
		.
	Min
850	Minimum distance

ATTENTION:

•Important: the appliance should be disconnected from the mains during installation or maintenance work.

•The kitchen units coming into direct contact with the appliance must be heat resistant (min. 80°C).

•To ensure correct ventilation, leave an opening at the bottom of the unit (following the sizes in the drawing).

9

Image 9

Contents Kscx 501974402003UK 8-10-2007 1347 Pagina 501974402003UK 8-10-2007 1347 Pagina Product description Product description Product description Control Panel Avoid exposing the appliance to atmospheric agents Important notesBuilding-in Building-in Do not use multiple plug adapters or extension leads Before first useEnglish Installed Press OK to Install EnglishFill Tank Press OKPreparing coffee using coffee beans Empty Grounds Container Regulating the coffee mill Changing the quantity of coffee in the cupReady PRE-GROUND Preparing cappuccinos using steam HOT Water Press OKHot water delivery Cleaning and maintenance Cleaning the coffee makerCleaning the infuser Correctly Correct Incorrect AUTO-START no Start TimeDescale Descale noRinsing Rinsing Fill Water TankRinse Complete Press OK Button OFF After 1 HourSetting water hardness Reset to Default noResetting factory default settings Water HardnessMessage Meaning What to do Meaning of messages and what to doProblem Cause Solution Ground coffee is being Electrical connection for Great Britain and Ireland only After-Sales Service501974402003UK 8-10-2007 1348 Pagina 5019 744