KitchenAid KSCX 3610 manual Changing the quantity of coffee in the cup, Regulating the coffee mill

Page 15

501974402003_UK 8-10-2007 13:47 Pagina 15

6 Changing the quantity of coffee in the cup

The appliance is factory preset to automatically deliver the following quantities of coffee:

-short (when the button is pressed);

-standard (when the button is pressed);

-long (when the button is pressed);

To change these quantities, proceed as follows:

-press the button corresponding to the quantity you want to change ( , or ) for at least 8 seconds until the message "PROGRAM QUANTITY" is displayed;

-when the coffee in the cup reaches the required level, press the same button again to memorise the new amount.

7 Regulating the coffee mill

However, after making the first few coffees, if you find that coffee delivery is either too fast or too slow (in drips), the grinding coarseness regulator can be adjusted (fig. 10).

Turning it 1 click (1 number) clockwise speeds up coffee delivery (without drips).

Turning it 1 click anticlockwise slows down delivery giving a creamier appearance to the coffee. These adjustments will only be evident after at least 2 cups of coffee have been run off.

The grinding coarseness regulator must only be turned when the coffee mill is on.

Turn anticlockwise to obtain finer ground coffee, slower delivery and a creamier appearance.

Turn clockwise for coarser ground coffee and faster delivery (not a drop at a time).

(Coffee has been used to factory test the appliance and it is therefore completely normal for there to be traces of coffee in the mill. This appliance is however guaranteed to be new).

15

Image 15
Contents Kscx 501974402003UK 8-10-2007 1347 Pagina 501974402003UK 8-10-2007 1347 Pagina Product description Product description Product description Control Panel Avoid exposing the appliance to atmospheric agents Important notesBuilding-in Building-in Do not use multiple plug adapters or extension leads Before first usePress OK Press OK to Install EnglishEnglish Installed Fill TankPreparing coffee using coffee beans Empty Grounds Container Regulating the coffee mill Changing the quantity of coffee in the cupReady PRE-GROUND Preparing cappuccinos using steam HOT Water Press OKHot water delivery Cleaning and maintenance Cleaning the coffee makerCleaning the infuser Correctly Correct Incorrect Descale no Start TimeAUTO-START no DescaleOFF After 1 Hour Rinsing Fill Water TankRinsing Rinse Complete Press OK ButtonWater Hardness Reset to Default noSetting water hardness Resetting factory default settingsMessage Meaning What to do Meaning of messages and what to doProblem Cause Solution Ground coffee is being Electrical connection for Great Britain and Ireland only After-Sales Service501974402003UK 8-10-2007 1348 Pagina 5019 744