501974402003_UK 8-10-2007 13:47 Pagina 11
3 Before first use
•After removing the packaging, make sure the product is complete and undamaged. If in doubt, do not use the appliance and contact a qualified professional.
•Installation must be carried out by a qualified techncian and in compliance with current regulations.
•Packing elements (plastic bags, polystyrene etc) must not be left within reach of children as they may represent a hazard.
•Never install the appliance in environments where the temperature may reach 0°C or lower (the appliance may be damaged if the water freezes).
•Make sure the mains voltage corresponds to the voltage indicated on the appliance rating plate. Connect the appliance to an efficiently earthed socket with a minimum current rating of 10A only. The manufacturer may not be considered liable for possible incidents caused by the failure to adequately earth the mains.
•If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional.
•Observance of safety directives requires that a multi pole switch with a minimum contact gap of 3 mm be used for the installation.
•Do not use multiple plug adapters or extension leads.
•The power cable on this appliance must not be replaced by the user as this operation requires the use of special tools. If the cable is damaged or requires replacing, contact an authorised service centre only to avoid all risks.
For the electrical connection use a H05
Conductors | Amount x Size | |||
|
|
|
|
|
|
| ~ | 3 x 1.0 mm2 | |
|
| |||
|
| |||
|
|
|
|
|
•You should personalise water hardness as soon as possible following the instructions in paragraph 12.6.
•The appliance's DATA PLATE is positioned on the side of the coffee maker so that it remains visible after installation when the machine is removed from its housing.
To learn how to operate the appliance correctly, when you use it for the first time, follow the step-
11