Prepare dishwasher

WARNING

Tip Over Hazard

Do not use dishwasher until completely installed. Do not push down on open door.

Doing so can result in serious injury or cuts.

WARNING

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

1.Put corner posts from packaging behind dishwasher. Grasp sides of dishwasher door frame and put dishwasher on its back, resting on top of the corner posts.

2.Remove two screws attaching access panel and lower panel to dishwasher using a 1/4” hex socket, nut driver or Phillips screwdriver.

7.Remove terminal box cover.

–If you are direct wiring: install a U.L.-listed/CSA- certified clamp connector to the terminal box. If using conduit, use a U.L.-listed/CSA-certified conduit connector.

–If you are installing a power supply cord kit, do so now, following kit instructions.

terminal

box cover

ADVERTENCIA

AVERTISSEMENT

cable clamp connector

dishwasher wires

Helpful Tip: Put cardboard under dishwasher until it is installed in cabinet opening. The cardboard will help protect floor covering during

installation.

8. Measure height of cabinet opening from underside of countertop to floor where dishwasher will be installed (you need the lowest point). Check chart for that height opening. Put wheels in the required position.

	Minimum	Wheel	Number of
	Minimum	Wheel	turns on
1	cutout height	position	turns on
	cutout height	position	front leg
			front leg
2	34" (86.4 cm)	1	10
3	34-1/4" (87 cm)	2	5
wheel	34-1/2" (87.6 cm)	3	0

access panel

lower panel

grounding clip

3.	Remove panels and set panels
	aside on a protective surface.
4.	Check that grounding clip is
	attached to the lower panel.

water inlet valve

9.Turn both front leveler legs to the same height.

If the minimum cutout height is less than 34” (86.4 cm), the rear wheels can be removed for additional clearance. This will allow the dishwasher to fit into a 33-7/8”

(86 cm) high cutout, but the dishwasher will

be more difficult to move into position. If front leg the wheels are removed, protect the floor

when moving the dishwasher.

If you have built-up floors

5.	Apply Teflon® tape or pipe
	joint compound to 90° elbow
	fitting and connect fitting to
	water inlet valve.
6.	Tighten elbow until snug, and
	be sure that it faces to the rear.

elbow

1.Measure height of opening from underside of countertop to built-up floor. If the height is at least 33-3/4” (85.7 cm), the dishwasher will fit into the opening without modification to the countertop or flooring.

2.Put wheels in position 1 and turn the front leveler legs up all the way.

countertop

33-3/4"

(85.7 cm)

min.

built-up

floor

shim

W10078153A specifications

The KitchenAid W10078153A is a versatile and essential appliance designed to elevate the cooking and baking experience in any kitchen. Known for its high build quality and reliability, this kitchen tool exemplifies the craftsmanship that KitchenAid is renowned for. With an array of features and modern technologies, it stands out as a must-have for both home cooks and professional chefs.

One of the main features of the W10078153A is its powerful performance. Equipped with a robust motor, it ensures efficient mixing and processing, capable of handling heavy doughs and large batches with ease. This makes it an ideal assistant for baking enthusiasts who frequently work with bread, pastries, and other dense mixtures. The appliance also comes with multiple speed settings, allowing users to select the perfect speed for various tasks, ranging from slow stirring to high-speed whipping.

Additionally, the W10078153A incorporates unique mixing technologies, including a planetary mixing action. This feature ensures that ingredients are thoroughly combined, as the mixing attachment rotates around the bowl, covering every corner for consistent blending. This innovative design helps reduce the mixing time and guarantees that even the most challenging recipes achieve the desired texture and results.

Another highlight of this kitchen appliance is its versatility. It includes various attachments that can be interchanged to perform different functions, such as kneading dough, whipping cream, or grinding meat. These attachments can be easily added or removed, making the W10078153A not just a mixer, but a multifunctional kitchen partner that streamlines food preparation tasks.

The design of the W10078153A is both stylish and functional. Its sleek appearance can complement any kitchen decor, while its sturdy construction ensures long-lasting durability. The user-friendly interface features easy-to-read controls and a tilting head that provides easy access to the mixing bowl. This thoughtful design makes it convenient for users to add ingredients while the mixer is in operation.

In summary, the KitchenAid W10078153A is more than just a kitchen appliance; it is a versatile tool designed for efficiency and performance. With its powerful motor, planetary mixing action, and interchangeable attachments, it offers a wide range of culinary possibilities. Whether you are an avid baker or simply looking to simplify your meal prep, this appliance is built to deliver outstanding results, making it an invaluable addition to any kitchen.