KitchenAid W10078153A Custom panel dimensions, For dishwashers with the control panel shown below

Page 12

9.Install the two #8-18 x 1-3/8" screws from the literature package in the top corners, as shown. Align top edges of full front panel and console; tighten corner screws.

2 screws

align top edges

1-3/8"screw

10.Tighten the two side screws reinstalled in Step 8.

11.Reinstall and tighten the three remaining side screws.

Custom panel dimensions

IMPORTANT: You need to know what control panel is on your dishwasher before you order your custom door panel.

For dishwashers with the control panel shown below:

(models KUDS03FTPA and KUDU03FTPA)

(Your model may vary slightly from picture above.)

Custom door panel dimensions are:

23-1/2" (59.7 cm)

 

*30-3/16" (76.7 cm)

3/4" (19.1 mm)

*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm).

Follow directions under Option #1 of “Install custom panel” section.

For dishwashers with the control panel shown below: (Models KUDC03IT, KUDK03IT and KUDL03IT)

(Your model may vary slightly from picture above.)

Custom door panel dimensions are:

 

 

*25-29/32" (65.8 cm)

23-3/8" (59.4 cm)

 

 

 

3/4" (19.1

mm)

1/8" (3.2 mm)

1/8" (3.2 mm)

*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm).

Follow directions in Option #2 of “Install custom panel” section.

12

Image 12
Contents Installation Instructions Undercounter Dishwasher Dishwasher Safety Table of ContentsYou need to Installation Requirements All installationsAddition, for new installations Tools and PartsProduct dimensions Cutout dimensionsIf direct wiring dishwasher If connecting dishwasher with a power supply cordDrain Requirements Water Supply RequirementsInstallation Instructions Prepare cabinet opening using existing utility hookupsInstall the drain hose Option 1 Waste disposer with air gapOption1 Direct wire method Electrical connectionOption 2 No waste disposer with air gap Option 4 No waste disposer no air gapInstall the water line Option 2 Power supply cord methodInstall moisture barrier on some models Prepare dishwasher If you have built-up floorsInstall the door handle on some models Install the door handle-Pro Line seriesInstall door panel-Pro Line series Custom panel dimensions For dishwashers with the control panel shown belowInstall custom panel Option 1 For models KUDS03FTPA and KUDU03FTPAOption 2 For models KUDC03IT, KUDK03IT and KUDL03IT Choose attachment option Check door spring tensionOption 1 Countertop attachment Option 2 Dishwasher side attachmentOption 1 Direct wire method Make Electrical ConnectionMove dishwasher into cabinet opening Level the dishwasherConnect to water supply Connect to drain Secure dishwasher in cabinet openingBottom sound pad installation on some models Complete installationCheck operation If dishwasher does not operateSécurité du lave-vaisselle Table des matièresTenir compte de ceci Exigences d’installation Emplacement d’installationPour toutes les configurations d’installation Outillage et piècesDimensions du produit Dimensions de l’espace d’installationSpécifications de la canalisation d’évacuation Spécifications de l’alimentation en eauSpécifications électriques Pour le raccordement direct du lave-vaisselleInstructions d’installation Installation du tuyau d’évacuationOption 1 broyeur à déchets avec brise-siphon Préparation de l’emplacement Raccordement électriqueInstallation de la canalisation d’eau Option 2 raccordement par cordon d’alimentationImportant Utiliser toujours un tuyau d’évacuation neuf Installation de la barrière contre lhumidité Préparation du lave-vaisselle Installation de la poignée de porte Installation du panneau de la porte- série Pro LineLine Dimensions du panneau personnalisé Dimensions du panneau de porte personnaliséInstallation du panneau personnalisé Option 1 Pour les modèles KUDS03FTPA and KUDU03FTPAOption 2 Pour les modèles KUDC03IT, KUDK03IT, KUDL03IT Choix de la méthode d’immobilisation de l’appareil Placer délicatement le panneau externe à partPlacer le panneau personnalisé fourni par le client face Option 1 Fixation sur le plan de travailInsertion du lave-vaisselle dans l’espace d’installation Contrôle de la tension des ressorts de la porteÉtablissement de l’aplomb du lave-vaisselle Raccordement électrique Option 1 Câblage directConseil utile Raccordement à la canalisation d’eau Raccordement à la canalisation d’évacuationInstallation du panneau d’insonorisation Dernières opérations de l’installation Contrôle du fonctionnementSi le lave-vaisselle ne fonctionne pas correctement Alimentation de l’appareil par câblage directW10078153A

W10078153A specifications

The KitchenAid W10078153A is a versatile and essential appliance designed to elevate the cooking and baking experience in any kitchen. Known for its high build quality and reliability, this kitchen tool exemplifies the craftsmanship that KitchenAid is renowned for. With an array of features and modern technologies, it stands out as a must-have for both home cooks and professional chefs.

One of the main features of the W10078153A is its powerful performance. Equipped with a robust motor, it ensures efficient mixing and processing, capable of handling heavy doughs and large batches with ease. This makes it an ideal assistant for baking enthusiasts who frequently work with bread, pastries, and other dense mixtures. The appliance also comes with multiple speed settings, allowing users to select the perfect speed for various tasks, ranging from slow stirring to high-speed whipping.

Additionally, the W10078153A incorporates unique mixing technologies, including a planetary mixing action. This feature ensures that ingredients are thoroughly combined, as the mixing attachment rotates around the bowl, covering every corner for consistent blending. This innovative design helps reduce the mixing time and guarantees that even the most challenging recipes achieve the desired texture and results.

Another highlight of this kitchen appliance is its versatility. It includes various attachments that can be interchanged to perform different functions, such as kneading dough, whipping cream, or grinding meat. These attachments can be easily added or removed, making the W10078153A not just a mixer, but a multifunctional kitchen partner that streamlines food preparation tasks.

The design of the W10078153A is both stylish and functional. Its sleek appearance can complement any kitchen decor, while its sturdy construction ensures long-lasting durability. The user-friendly interface features easy-to-read controls and a tilting head that provides easy access to the mixing bowl. This thoughtful design makes it convenient for users to add ingredients while the mixer is in operation.

In summary, the KitchenAid W10078153A is more than just a kitchen appliance; it is a versatile tool designed for efficiency and performance. With its powerful motor, planetary mixing action, and interchangeable attachments, it offers a wide range of culinary possibilities. Whether you are an avid baker or simply looking to simplify your meal prep, this appliance is built to deliver outstanding results, making it an invaluable addition to any kitchen.