KitchenAid W10078153A installation instructions Connect to water supply

Page 17

3.Connect the wires as follows using twist-on connectors sized to connect direct wire to 16-gauge dishwasher wire:

Power supply wire:

 

Terminal box wire:

white

 

white

 

black black

ground wire ground connector

WARNING

Electrical Shock Hazard

Electrically ground dishwasher.

Connect ground wire to green ground connector in terminal box.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Form bare ground wire into a U-shaped hook. Wrap ground wire hook clockwise around ground connector and under the washer.

5.Securely tighten ground connector.

ground wire

washer

 

ground connector

ground wire

6.Tighten clamp connector or conduit connector screws.

screws

7.Reinstall terminal box cover with wires inside terminal box. The cover must be outside the box on the left side.

ADVERTENCIA

AVERTISSEMENT

8.Make sure no wires are pinched by cover.

Option 2: Power supply cord method

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Check that power supply cord does not touch dishwasher motor or lower part of dishwasher tub.

Connect to water supply

Helpful Tip:

Compression fittings:

a. Slide nut onto copper tubing about 1" (2.5 cm).

b. Slide ferrule onto the tubing. Do not position ferrule on the end of the tubing.

c. Put the tubing into the elbow as far as it will go.

d. Slide the nut and ferrule forward and start the nut onto the elbow threads. Be gentle when handling and positioning the copper tubing, it bends and kinks easily.

nut

ferrule

elbow

1.To prevent vibration during operation, route the water supply line so that it does not touch the dishwasher base, frame or motor.

2.With copper tubing pushed into compression fitting as far as it will go, use a wrench and tighten compression fitting nut to elbow on water inlet valve.

3.Place paper towel under elbow. Turn on water supply and check for leaks.

17

Image 17
Contents Installation Instructions Undercounter Dishwasher You need to Dishwasher SafetyTable of Contents All installations Installation RequirementsAddition, for new installations Tools and PartsCutout dimensions Product dimensionsIf connecting dishwasher with a power supply cord If direct wiring dishwasherDrain Requirements Water Supply RequirementsPrepare cabinet opening using existing utility hookups Installation InstructionsInstall the drain hose Option 1 Waste disposer with air gapElectrical connection Option1 Direct wire methodOption 2 No waste disposer with air gap Option 4 No waste disposer no air gapOption 2 Power supply cord method Install the water lineInstall moisture barrier on some models If you have built-up floors Prepare dishwasherInstall door panel-Pro Line series Install the door handle on some modelsInstall the door handle-Pro Line series For dishwashers with the control panel shown below Custom panel dimensionsOption 1 For models KUDS03FTPA and KUDU03FTPA Install custom panelOption 2 For models KUDC03IT, KUDK03IT and KUDL03IT Check door spring tension Choose attachment optionOption 1 Countertop attachment Option 2 Dishwasher side attachmentMake Electrical Connection Option 1 Direct wire methodMove dishwasher into cabinet opening Level the dishwasherConnect to water supply Secure dishwasher in cabinet opening Connect to drainComplete installation Bottom sound pad installation on some modelsIf dishwasher does not operate Check operationTenir compte de ceci Sécurité du lave-vaisselleTable des matières Emplacement d’installation Exigences d’installationPour toutes les configurations d’installation Outillage et piècesDimensions de l’espace d’installation Dimensions du produitSpécifications de l’alimentation en eau Spécifications de la canalisation d’évacuationSpécifications électriques Pour le raccordement direct du lave-vaisselleOption 1 broyeur à déchets avec brise-siphon Instructions d’installationInstallation du tuyau d’évacuation Raccordement électrique Préparation de l’emplacementImportant Utiliser toujours un tuyau d’évacuation neuf Installation de la canalisation d’eauOption 2 raccordement par cordon d’alimentation Installation de la barrière contre lhumidité Préparation du lave-vaisselle Line Installation de la poignée de porteInstallation du panneau de la porte- série Pro Line Dimensions du panneau de porte personnalisé Dimensions du panneau personnaliséOption 1 Pour les modèles KUDS03FTPA and KUDU03FTPA Installation du panneau personnaliséOption 2 Pour les modèles KUDC03IT, KUDK03IT, KUDL03IT Placer délicatement le panneau externe à part Choix de la méthode d’immobilisation de l’appareilPlacer le panneau personnalisé fourni par le client face Option 1 Fixation sur le plan de travailÉtablissement de l’aplomb du lave-vaisselle Insertion du lave-vaisselle dans l’espace d’installationContrôle de la tension des ressorts de la porte Conseil utile Raccordement électriqueOption 1 Câblage direct Raccordement à la canalisation d’évacuation Raccordement à la canalisation d’eauInstallation du panneau d’insonorisation Contrôle du fonctionnement Dernières opérations de l’installationSi le lave-vaisselle ne fonctionne pas correctement Alimentation de l’appareil par câblage directW10078153A

W10078153A specifications

The KitchenAid W10078153A is a versatile and essential appliance designed to elevate the cooking and baking experience in any kitchen. Known for its high build quality and reliability, this kitchen tool exemplifies the craftsmanship that KitchenAid is renowned for. With an array of features and modern technologies, it stands out as a must-have for both home cooks and professional chefs.

One of the main features of the W10078153A is its powerful performance. Equipped with a robust motor, it ensures efficient mixing and processing, capable of handling heavy doughs and large batches with ease. This makes it an ideal assistant for baking enthusiasts who frequently work with bread, pastries, and other dense mixtures. The appliance also comes with multiple speed settings, allowing users to select the perfect speed for various tasks, ranging from slow stirring to high-speed whipping.

Additionally, the W10078153A incorporates unique mixing technologies, including a planetary mixing action. This feature ensures that ingredients are thoroughly combined, as the mixing attachment rotates around the bowl, covering every corner for consistent blending. This innovative design helps reduce the mixing time and guarantees that even the most challenging recipes achieve the desired texture and results.

Another highlight of this kitchen appliance is its versatility. It includes various attachments that can be interchanged to perform different functions, such as kneading dough, whipping cream, or grinding meat. These attachments can be easily added or removed, making the W10078153A not just a mixer, but a multifunctional kitchen partner that streamlines food preparation tasks.

The design of the W10078153A is both stylish and functional. Its sleek appearance can complement any kitchen decor, while its sturdy construction ensures long-lasting durability. The user-friendly interface features easy-to-read controls and a tilting head that provides easy access to the mixing bowl. This thoughtful design makes it convenient for users to add ingredients while the mixer is in operation.

In summary, the KitchenAid W10078153A is more than just a kitchen appliance; it is a versatile tool designed for efficiency and performance. With its powerful motor, planetary mixing action, and interchangeable attachments, it offers a wide range of culinary possibilities. Whether you are an avid baker or simply looking to simplify your meal prep, this appliance is built to deliver outstanding results, making it an invaluable addition to any kitchen.