KitchenAid W10078153A Option 2 For models KUDC03IT, KUDK03IT and KUDL03IT

Page 14

11.Align the top edge of the customer-supplied custom panel with the top of the console.

12.Drill two 3/32" pilot holes 1/2" (13 mm) deep, into the customer-supplied custom panel, through the holes in the top corners on the inner panel, as shown.

1.With a TORX® screwdriver, remove three screws from both sides of door; hold the outer panel up while removing the screws.

13. Install the two #8-18 x 1-3/8" screws from the literature package in the top corners of the inner panel.

inner panel

align top edges

drill through these holes

1-3/8"screw

3 screws

outer panel

2.

Gently set outer panel aside.

3.

Lay the cutomer-supplied custom panel face down on a

 

protective, non-scratching surface.

4.

Position the outer panel on the back of the customer-

 

supplied custom panel as shown; make sure top edge of

14.Tighten the six side screws reinstalled in Step 10.

Option 2: For models KUDC03IT, KUDK03IT and KUDL03IT

All models require an accessory option to attach custom panels. Kit No. 8171555 (black), 8171556 (white) or 8171557 (biscuit) are available. To order, call customer service at 800-444-1230.

NOTE: A custom full front panel must weigh no more than 14 pounds (6.3 kg) and must be made to specific dimensions. It is recommended that a cabinetmaker cut the custom panel because of the precise dimensions needed.

IMPORTANT: Use a moisture resistant sealer on both sides and all edges of the panel to protect it from humidity.

NOTE: These dimensions are for frameless custom panel models with a 4-inch (10.2 cm) console only.

 

 

*25-29/32" (65.8 cm)

23-3/8" (59.3 cm)

 

 

 

 

 

3/4"

(19.1 mm)

1/8" (3.2 cm)

custom panel dimensions

1/8" (3.2 cm)

*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm).

the outer panel is aligned with the top edge of the

customer-supplied custom panel, and both panels are

centered side to side.

mark 4

inner holes

outer panel

align top

edges

customer-supplied

custom panel

5.Mark all four hole locations; remove outer panel and drill 3/32" pilot holes 1/2" (13 mm) deep, in customer-supplied custom panel.

6.Place the outer panel on the back of the customer- supplied custom panel and align holes.

7.Attach outer panel to back of customer-supplied custom panel with four #10 x 1/2" wood screws (not supplied). If the customer-supplied custom panel is less than 3/4" (1.9 cm) thick where the screws are attached, shorter screws maybe required.

8.Attach the panel assembly to the door by reinstalling the three screws on each side.

3 screws

3 screws

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Installation Instructions Undercounter Dishwasher You need to Dishwasher SafetyTable of Contents Addition, for new installations Installation RequirementsAll installations Tools and PartsProduct dimensions Cutout dimensionsDrain Requirements If direct wiring dishwasherIf connecting dishwasher with a power supply cord Water Supply RequirementsInstall the drain hose Installation InstructionsPrepare cabinet opening using existing utility hookups Option 1 Waste disposer with air gapOption 2 No waste disposer with air gap Option1 Direct wire methodElectrical connection Option 4 No waste disposer no air gapInstall the water line Option 2 Power supply cord methodInstall moisture barrier on some models Prepare dishwasher If you have built-up floorsInstall door panel-Pro Line series Install the door handle on some modelsInstall the door handle-Pro Line series Custom panel dimensions For dishwashers with the control panel shown belowInstall custom panel Option 1 For models KUDS03FTPA and KUDU03FTPAOption 2 For models KUDC03IT, KUDK03IT and KUDL03IT Option 1 Countertop attachment Choose attachment optionCheck door spring tension Option 2 Dishwasher side attachmentMove dishwasher into cabinet opening Option 1 Direct wire methodMake Electrical Connection Level the dishwasherConnect to water supply Connect to drain Secure dishwasher in cabinet openingBottom sound pad installation on some models Complete installationCheck operation If dishwasher does not operateTenir compte de ceci Sécurité du lave-vaisselleTable des matières Pour toutes les configurations d’installation Exigences d’installationEmplacement d’installation Outillage et piècesDimensions du produit Dimensions de l’espace d’installationSpécifications électriques Spécifications de la canalisation d’évacuationSpécifications de l’alimentation en eau Pour le raccordement direct du lave-vaisselleOption 1 broyeur à déchets avec brise-siphon Instructions d’installationInstallation du tuyau d’évacuation Préparation de l’emplacement Raccordement électriqueImportant Utiliser toujours un tuyau d’évacuation neuf Installation de la canalisation d’eauOption 2 raccordement par cordon d’alimentation Installation de la barrière contre lhumidité Préparation du lave-vaisselle Line Installation de la poignée de porteInstallation du panneau de la porte- série Pro Line Dimensions du panneau personnalisé Dimensions du panneau de porte personnaliséInstallation du panneau personnalisé Option 1 Pour les modèles KUDS03FTPA and KUDU03FTPAOption 2 Pour les modèles KUDC03IT, KUDK03IT, KUDL03IT Placer le panneau personnalisé fourni par le client face Choix de la méthode d’immobilisation de l’appareilPlacer délicatement le panneau externe à part Option 1 Fixation sur le plan de travailÉtablissement de l’aplomb du lave-vaisselle Insertion du lave-vaisselle dans l’espace d’installationContrôle de la tension des ressorts de la porte Conseil utile Raccordement électriqueOption 1 Câblage direct Raccordement à la canalisation d’eau Raccordement à la canalisation d’évacuationInstallation du panneau d’insonorisation Si le lave-vaisselle ne fonctionne pas correctement Dernières opérations de l’installationContrôle du fonctionnement Alimentation de l’appareil par câblage directW10078153A

W10078153A specifications

The KitchenAid W10078153A is a versatile and essential appliance designed to elevate the cooking and baking experience in any kitchen. Known for its high build quality and reliability, this kitchen tool exemplifies the craftsmanship that KitchenAid is renowned for. With an array of features and modern technologies, it stands out as a must-have for both home cooks and professional chefs.

One of the main features of the W10078153A is its powerful performance. Equipped with a robust motor, it ensures efficient mixing and processing, capable of handling heavy doughs and large batches with ease. This makes it an ideal assistant for baking enthusiasts who frequently work with bread, pastries, and other dense mixtures. The appliance also comes with multiple speed settings, allowing users to select the perfect speed for various tasks, ranging from slow stirring to high-speed whipping.

Additionally, the W10078153A incorporates unique mixing technologies, including a planetary mixing action. This feature ensures that ingredients are thoroughly combined, as the mixing attachment rotates around the bowl, covering every corner for consistent blending. This innovative design helps reduce the mixing time and guarantees that even the most challenging recipes achieve the desired texture and results.

Another highlight of this kitchen appliance is its versatility. It includes various attachments that can be interchanged to perform different functions, such as kneading dough, whipping cream, or grinding meat. These attachments can be easily added or removed, making the W10078153A not just a mixer, but a multifunctional kitchen partner that streamlines food preparation tasks.

The design of the W10078153A is both stylish and functional. Its sleek appearance can complement any kitchen decor, while its sturdy construction ensures long-lasting durability. The user-friendly interface features easy-to-read controls and a tilting head that provides easy access to the mixing bowl. This thoughtful design makes it convenient for users to add ingredients while the mixer is in operation.

In summary, the KitchenAid W10078153A is more than just a kitchen appliance; it is a versatile tool designed for efficiency and performance. With its powerful motor, planetary mixing action, and interchangeable attachments, it offers a wide range of culinary possibilities. Whether you are an avid baker or simply looking to simplify your meal prep, this appliance is built to deliver outstanding results, making it an invaluable addition to any kitchen.
Top Page Image Contents