Check operation
1.Read the Use and Care Guide that came with your dishwasher.
2.Check that all parts have been installed and no steps were skipped.
3.Check that you have all the tools you used.
4.Start dishwasher and allow it to complete the shortest wash cycle. After the first two minutes, unlatch door, wait five seconds, then open door.
5.Check to see that there is water in the bottom of the dishwasher tub. Check that dishwasher is working properly.
6.If not, disconnect power or unplug dishwasher and see “If dishwasher does not operate” section.
If dishwasher does not operate
First try the solutions suggested here to possibly avoid the cost of a service call.
•Has the circuit breaker tripped or the house fuse blown?
•Is the door closed tightly and latched?
•Has the cycle been set correctly to start the dishwasher?
•Is the water turned on?
If none of these work, call
20